argon audio SA1 Quick Start

We care about the Environment

By refraining from inserting a full printed manual with our Argon Audio
products we save more than 20 tons of paper each year.
See back side of this insert for Quick start guide

Safety

Safety Instructions

•
Unplug this product from the wall outlet before cleaning. Do
not use this product near water or moisture. Do not spill
liquids on the product. Clean only with a dry cloth.
•
Place the unit on a solid surface.
•
Do not put it in a closed bookcase or a cabinet that may keep
air from flowing through its ventilation openings.
•
Do not install near any heat sources, such as radiators, heat
registers, stoves or other appliances that produce heat.
•
Protect the power cord from being walked on or pinched,
particularly at plugs and the point where they exit from the
product.
•
During Lightning storms, unplug the product from the power
source or if unused for long periods of time. This will prevent
lightning and power-line surge damage to the product.
•
•
•
•
w w w . a r g o n a u d i o . c o m
S A 1 Q u i c k s t a r t
Do not attempt to service this product yourself. Opening or
removing covers may expose you to dangerous voltages or
other hazards. Please contact the manufacturer to be referred
to an authorized service center near you.
Do not overload wall outlets, extension cords, or integral
power circuits as this can result in a risk of fire or electric
shock.
Never push any object through the product openings, as this
can result in fire, electric shock or damage.
Use proper power sources. Plug the product into a proper
power source, as described in the operating instructions or as
marked on the product.
If there is a Lightning flash with an arrow head
on the product, it's intended to alert the User
of the presence of un-insulated "dangerous
voltage" within the product, that might be of
sufficient magnitude to constitute a risk of
electric shock to persons.
If there is an Exclamation point on the
product, it's intended to alert the User that
there is important operating and maintenance
(servicing) information in the User manual.
If there is a double rectangular symbol on the
product, it means that the product is double
insulated. Earth connection is not required.