TP-Link TL-WN610G User Manual page 23

TL-WN610G/TL-WN650G/TL-WN651G
Security Tab to allow association. To complete WEP encryption configuration, you must select the
802.11 Authentication Mode as appropriate on the Advanced tab of this Profile Management
dialog.
3. Edit the Advanced tab
Power Save Mode -
•
Maximum - Selects maximum mode to let the access point buffer incoming messages
for the wireless adapter. The adapter will detect the access point if any messages are
waiting periodically.
•
Normal - In Normal mode, the adapter will be switched to maximum mode
automatically when no large packets are retrieved.
•
Off - turns power saving off, thus powering up the wireless adapter continuously for a
short message response time.
802.11b Preamble - Specifies the preamble setting in 802.11b. The default setting is
Figure 3-5 Security tab of Profile Management
Figure 3-6 Define Shared Keys
108M Wireless Adapter User Guide
16