Table of Contents
Advertisement
TL-WN612AG/TL-WN652AG/TL-WN653AG
Note:
If the access point that the wireless adapter is associating to has WEP set to Optional and the
client has WEP enabled, make sure that Allow Association to Mixed Cells is checked on the
Security Tab to allow association. To complete WEP encryption configuration, you must select the
802.11 Authentication Mode as appropriate on the Advanced tab of this Profile Management
dialog.
3.
Edit the Advanced tab
Power Save Mode:
•
Maximum - Selects maximum mode to let the access point buffer incoming messages
for the wireless adapter. The adapter will detect the access point if any messages are
waiting periodically.
•
Normal - In Normal mode, the adapter will be switched to maximum mode automatically
when no large packets are retrieved.
•
Off - turns power saving off, thus powering up the wireless adapter continuously for a
short message response time.
Network Type: Select Infrastructure or Ad Hoc.
802.11b Preamble: Specifies the preamble setting in 802.11b. The default setting is Short &
Long (access point mode), which allows both short and long headers in the 802.11b
frames. The adapter can only use short radio headers if the access point supports and uses
them. Set to Long Only to override allowing short frames.
Wireless Mode: Specifies 5 GHz 54 Mbps or 2.4 GHz 54 Mbps or 2.4 GHz 11 Mbps
operation in an access point network. Specifies Super A/G operation at 108Mbps data rates.
The wireless adapter must match the wireless mode of the access point with which it
associates.
Wireless Mode when Starting an Ad Hoc Network: Specifies 5GHz 108/54 Mbps or
2.4GHz 54/11 Mbps to start an Ad Hoc network if no matching network name is found after
scanning all available modes. This mode also allows the selection of the channel the wireless
adapter uses. The channels available depend on the regulatory domain. If the adapter finds
no other ad hoc adapters, the channel that the adapter starts the ad hoc network with will be
selected automatically.
802.11 Authentication Mode: Select which mode the wireless adapter uses to authenticate
to an access point:
Figure 3-7 Define Shared Keys
14
108M Wireless Adapter User Guide
Advertisement
Table of Contents
