Included In The Package; Battery Removal And Installation - VTech Shake It Bluey Instruction Manual

INCLUDED IN THE PACKAGE

• Shake It Bluey
• Quick Start Guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy, and should be discarded for your child's safety.
NOTE:
Please save this Instruction Manual as it contains important information.
Unlock the Packaging Locks:
INSTRUCTIONS

BATTERY REMOVAL AND INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a screwdriver
to loosen the screw.
3. If used batteries are present, remove these batteries from the unit
by pulling up on one end of each battery.
4. Install 2 new 'AAA' (AM-4/LR03) batteries
following the diagram inside the
battery box. (For best performance,
alkaline batteries or fully charged
Ni-MH rechargeable batteries are
recommended).
5. Replace the battery cover and tighten the
screw to secure.
Turn the packaging locks anticlockwise
several times.
Pull out and discard the packaging locks.
5