Chapter 1 Introduction; Product Overview; Main Features; Led Status - TP-Link TG-5269 User Manual

Chapter 1 Introduction

Thank you for choosing the TG-5269 10/100/1000Mbps Gigabit Ethernet PC Card!

1.1 Product Overview

The Card is a highly integrated and cost-effective Gigabit Ethernet Card that provides 32-bit
performance, Cardbus controller, and full compliance with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX, IEEE 802.ab 1000Base-T specifications and IEEE 802.3x Full Duplex Flow.
TG-5269 keeps low cost and eliminates usage barriers. It is the easiest way to upgrade a network
from 10M to 100M and 1000Mbps. Supports 10Mbps, 100Mbps and 1000Mbps network speed
both in Half-Duplex and Full-Duplex transfer modes, using Auto-Negotiation technology to detect
the network speed. It also can be widely used in most modern Operating System.

1.2 Main Features

Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Complies with 32-bit CardBus standard and PC Card type II standard
68 pin PC Card standard connector, 1 RJ45 port (Auto MD/MDIX)
10/100/1000M Auto-Negotiation, Full-Duplex and Half-Duplex Auto-Detect
Supports Ethernet frame with VLAN Tag
Supports receiving and transmitting jumbo frames
Supports hot-swappable
Supports Win9x/ME/2000/XP/Vista, Netware 3.x/4.x/5.x ,Linux etc

1.3 LED Status

The 1000M Link/Act LED of TG-5269 indicates Link/Act status when the Card works in the 1000M
mode. It will light when connection is built, and glitter when the Card is transmitting or receiving
data.
The 100M Link/Act of TG-5269 indicates Link/Act status when the Card is working in the 100M
mode. It will light when connection is built, and glitter when the Card is transmitting or receiving
data.
TG-5269 10/100/1000Mbps Gigabit Ethernet PC Card User Guide
2