GlobalSafe Global Fit Manual

SAFE MANUAL
Upon first using the safe, turn the black power switch located on the inside
of the door next to the hinge to the on position
1) Enter any 4-digit code into the safe keypad and press the "Lock"
button.
2) The safe's display will read "CLOSE" and the safe will lock.
3) To open, enter the same code.
4) The safe's display will read "OPEN" and the safe will unlock.
5) The safe's memory will clear and the user may now lock the safe with
a different code.

RESET SAFES TO FACTORY SETTINGS

Press "Clear" twice, PROG will show on the LED
Input 964117, Press "Lock" "RESET" will show on the LED
The safe is now reset to the factory settings including the 0000 for the CEU.
1) Remove the silver plaque from the front of the safe using an allen
wrench.
2) Insert the key and turn clockwise to open the safe.
3) With the safe in the unlocked position and the key still inserted enter
1,2,3,4 on the keypad and press the lock button. The key will rotate
back into the locked position. You will need to help the key rotate
back to avoid getting stuck.
4) In the locked position remove the key and enter 1,2,3,4 to bring the
safe to the unlocked position and remove the key.

Basic Operating Instructions

LOCKING THE SAFE WITH A CODE

ON THE KEYPAD OF THE SAFE

USING THE MANUAL KEY