Advertisement
Quick Links
Carefully review assembly and care instructions before using this product. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
CR919
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
9 - DRAWER CHEST
AGR-393
SAVE THIS MANUAL FOR FUTURE REFERENCE.
/
/
Order/Customer Reference Number:
2-PERSON
ASSEMBLY
RECOMMENDED
02/2023
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
Tools Required
(not included)
Phillips
Screwdriver
Regular
Screwdriver
Rubber Mallet
Hammer
Power Drill,
6mm Drill Bit,
2mm Drill Bit
(only use for installing wall anchor kit)
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO
Page 1 / 17
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Sunnydaze Decor AGR-393
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 INTRODUCTION Read the manual carefully to ensure you fully understand all use, care, assembly, and safety information. Assemble on a soft, flat, clean, and Read this manual carefully and dry surface. follow the assembly instructions in the order listed. Pay close Use a soft, protective barrier when attention to assembly drawings.
- Page 3 COMPONENTS Part Name Qty. Left Side Panel Left Stile Right Side Panel Right Stile Outside Drawer Rail (L/R) Front Top Horizontal Face Frame Top Drawer Vertical Face Frame Top Drawer Horizontal Face Frame Middle Drawer Vertical Face Frame Inspect packaging to ensure all Bottom Drawer Horizontal Face Frame parts are accounted for before disposing of packing materials.
- Page 4 ASSEMBLY Carefully review all steps and fully understand assembly before beginning. IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability. STEP 1 TIP: Install connectors and shelf pins by gently tapping them into the designated holes using a rubber mallet.
- Page 5 STEP 3 07: 1 09: 1 11: 1 13: 1 14: 1 17: 1 18: 1 A: 28 Install two Wood Dowels (A) into each end of the these components: Front Top Horizontal Face Frame (07), Top Drawer Horizontal Face Frame (09), Bottom Drawer Horizontal Face Frame (11), Bottom Horizontal Frame (13), Back Bottom Horizontal Support (14), Back Center Horizontal Support (17), and Back Top Horizontal Support (18).
- Page 6 STEP 5 NOTE: Components shown in this step will be secured with hardware in Step 7. Identify the front, back, top and bottom of each component shown. Place the backside support pieces (18,17,14) on a smooth, clean surface with the angled holes facing down. Ensuring Part 14 is on the bottom and Part 18 is on top, align the dowels with the back side of the side panels (02,04).
- Page 7 STEP 7 B: 6 Carefully flip the unit upright. Secure the backside supports using six M4.5x28mm Pan Screws (B), as shown. STEP 8 B: 12 IMPORTANT: Ensure the drawer rails are installed in the correct direction, as indicated in the diagrams. Identify the two indents on Outside Drawer Rails (06), the indent with the shortest distance between the indent and the edge of the rail must be installed toward the front of the cabinet.
- Page 8 STEP 9 H: 18 IMPORTANT: The arrow on the drawer slide must point toward the front of the cabinet. Ensure the drawer slide remains centered on the drawer rail; if the slides are not centered, the drawer will be crooked. Push the front of one Drawer Slide (J) backward.
- Page 9 STEP 11 B: 6 IMPORTANT: Ensure Part 15 is installed in the correct direction, as shown in the diagram. Ensuring the drawer slides are toward the front, install six Center Drawer Rails (15) into the back supports as shown. Secure each rail to the back supports using M4.5x28mm Pan Screws (B). STEP 12 G: 2 IMPORTANT:...
- Page 10 STEP 13 G: 5 IMPORTANT: Ensure the vertical face frames are installed in the correct direction, as shown in the diagram. Installation direction is very important in this step. Identify the longer gap between the dowel mounting holes and the edge of Top Drawer Vertical Face Frames (08) and Middle Drawer Vertical Face Frames (10). With the angled mounting holes facing upward, align three Top Drawer Vertical Face Frames (08) and two Middle Drawer Vertical Face Frame (10) with Top Drawer Horizontal Face Frame (09).
- Page 11 STEP 15 03: 1 05: 1 G: 6 With the dowel mounting holes facing upward, align the Left and Right Stiles (03,05) with the front face frames. Secure each side using three M3.5x25mm Pan Screws (G), as shown. STEP 16 B: 12 Align the assembled front frame with the cabinet, as shown.
- Page 12 STEP 17 Assistance is recommended for this step. 19: 2 B: 4 Align two Side Trim Boards (19) with the bottom of the unit, as shown. To ensure the trim boards remain flush with the unit, have an assistant hold them firmly in place while the hardware is secured. From the inside of the side panels, secure each trim board using two M4.5x28mm Pan Screws (B).
- Page 13 STEP 19 Assistance is recommended for this step. 21: 2 Gently lay the unit face-down on a soft, clean surface. Place two Backing Boards (21) onto the back of the unit, ensuring they are snug within the lips of the top and side panels.
- Page 14 STEP 21 26: 3 27: 6 28: 3 29: 3 D: 3 E: 24 Ensuring the inside grooves align, secure two Medium Drawer Sides (27) to Medium Drawer Face (29) using four M3.5x30mm Flat Screws (E). Slide Medium Drawer Bottom (28) into the grooves, as shown. Secure Medium Drawer Back (26) to the drawer sides using four M3.5x30mm Flat Screws (E).
- Page 15 STEP 23 K: 4 Working one drawer at a time, extend the drawer slides out from the bottom row cabinet. Align the first small hole on the drawer slide with the pre-drilled hole on the front of the drawer sides. From the inside of the drawer, secure the drawer to the slide using one M4x8mm Bolt (K).
- Page 16 STEP 25 For even spacing, carefully measure and install eight Tacks (F) as indicated above. HELPFUL MEASURING HACK To help ensure tacks are evenly spaced, we developed a hack to make this step easier. Grab a blank white piece of paper or tracing paper, a writing utensil, a ruler and scissors. The blocks below are sized to the dimensions noted in the above diagrams.
- Page 17 STEP 26 Y: 1 Wall WARNING: Check for pipes and electrical wiring before drilling. IMPORTANT: If walls are not solid like brick, stone or concrete, you will require special fittings (not included). When in doubt, consult a professional. Carefully measure the location of pilot hole before drilling and installing the unit. •...
Need help?
Do you have a question about the AGR-393 and is the answer not in the manual?
Questions and answers