Summary of Contents for SOLINTEG Integ R Series
- Page 1 User Manual Integ R series DuoCOM module I n t e g s e r i e s D u o CO M M o d u l e User Manual ENGLISH VERSION...
-
Page 2: Product Introduction
User Manual Integ R series DuoCOM module Product Description 1.1.Product Introduction DuoCOM module supports both WiFi and LAN connection. At the same time, it supports both remote and local communication. WiFi Router phone Figure 1-1 Remote server communication DuoCOM can be used for WiFi or LAN communication alone, or connected both at the same time. -
Page 3: Product Appearance
User Manual Integ R series DuoCOM module 1.2 Product Appearance Indicator Button Figure 1-3 DuoCOM 1.3 Indicator and Button Press 1 second : Reset device,the indicator goes off for 2 seconds, then flashes normally. Press 5 second : Restore factory default settings, the indicator goes off for 2 seconds, then flashes once every 2 seconds, until the factory restore is completed. - Page 4 User Manual Integ R series DuoCOM module Configuration 2.1 Install The Network Cable Sealing Ring Plastic NUT RJ45 Plug Ethernet Port(inside) Figure 2-1 Step1: Remove the “Plastic Nut” and “Sealing Ring” in turn. Step2: Pass the network cable plug through the“Plastic Nut” and “Sealing Ring”...
- Page 5 User Manual Integ R series DuoCOM module Due to limited space, only RJ45 plug without protective cap can be used. NOTE Protection cap The network cable is required to be circular or oval, and the diameter of the network cable needs to be greater more than 5.5mm and less than 6.5mm in order to be properly sealed.
-
Page 6: Lan Configuration
User Manual Integ R series DuoCOM module 2.2 LAN Configuration If DHCP is enabled on the router, the DuoCOM does not need to be con- figured. Otherwise, the DuoCOM will need to be configured on inverter screen. ① Find the “General Settings” by short pressing the button on the invert- er screen. -
Page 7: Wifi Configuration
User Manual Integ R series DuoCOM module 2.3 WIFI Configuration... - Page 8 User Manual Integ R series DuoCOM module "Connection succeeded" will displayed if connected successfully.The indicator of the WiFi module will be steady on. Wireless operating frequency is only supported from 2.412-2.484 （ GHz ） . NOTE...
- Page 9 User Manual Integ R series DuoCOM module 2.4 Local configuration App DuoCOM also supports local configured App.Local configuration App is designed for quick configuration of hybrid inverters, offering features such as safety code, battery brand and type, work modes, and off-grid application settings through WiFi direct connection, etc.
-
Page 10: Contact Information
User Manual Integ R series DuoCOM module Contact Information Should you have any question about this product, please contact us. We need the following information to provide you the best assistance: • Model of the device • Serial number of the device •... - Page 11 www.solinteg.com...
Need help?
Do you have a question about the Integ R Series and is the answer not in the manual?
Questions and answers