Table of Contents
Advertisement
NEtworKINStALLAtIoN
Automaticconnection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those val-
ues manually.
1 Open the menu with »mENu«.
2 Select menu item »INTER@CTIVE TV« with
»
« or »
« and press »oK« to confirm.
v
Λ
– » INTER@CTIVE TV« menu is displayed.
3 Select the line »Connection Type« with »
or »
« and select »Wireless« with »
Λ
4 Select »Network Configuration« with »
»
« and select the option »Auto« with »
Λ
>
»
«.
INTER@CTIVE TV
Inter@ctive Applications
Network Settings
Connection Type
Select Access Point
Network Settings
IP Address
DNS
Netmask
Gateway
5 Select the line »Select Access Point« with
»
« or »
« and press »oK« to confirm.
v
Λ
– » Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
3 6
ENGLISH
<
dd.mm.yyyy
Wireless
N/A
Auto
10.134.151.15
10.134.150.8
255.255.255.0
10.134.151.254
Connect
Exit
Connection test
Back
-----------------------------------------------------------------------------
6 Select the network that you want to connect
with »
v
to confirm.
– W ireless connection password screen is
displayed.
7 Select the required character with »
<
»
« or »
with »oK«.
– S elect »ABC« for uppercase and »abc«
for lowercase and press »oK« to confirm.
– S elect »?@123« or numbers and symbols
and press »oK« to confirm.
– S elect »
entered and press »oK« to confirm.
«
– E nter the password and use »
v
>
«, »
«.
<
»
« or »
»oK« to confirm.
« or
v
<
«,
Notes:
In WEP encryption system, more than one
7
network password can be assigned to the
network. Your television can connect the
hh:mm
network only with the password in level one.
F or TV to discover the wireless modem on
7
the network, the network name should
OK
support ASCII characters.
8 Select »Connect« with »
the modem connection.
– » Connecting ... Please wait« message will
be displayed.
9 Press »
network connection is established with the
current settings.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
10 Press »mENu« to end the setting.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
<
>
«, »
«, »
« or »
« and press »oK«
Λ
>
« and move to the next character
« to delete the character
>
« to select » Submit« and press
« (red) to establish
« (green) to make sure that the
«, »
«,
v
Λ
«, »
«,
v
Λ
Advertisement
Table of Contents
