Huawei STS-3000K-H1 Installation Manual page 54

STS-(3000K, 6000K)-H1 Smart Transformer Station
(Spain, Eiffage Turroneros)
Installation Guide


Procedure
Step 1 Connect a PE cable.
Figure 7-2 Connecting a PE cable to the chassis shell
Figure 7-3 Connecting a PE cable to the main ground bar in the LV room
----End
Follow-up Procedure
To enhance the corrosion resistance of a ground terminal, apply silica gel or paint on it after
connecting the PE cable.
Issue 02 (2020-02-21)
Do not connect devices such as fuses and switches to a PE cable.
Connect the PE cable to the chassis shell or the ground point of the main ground bar in
the LV room.
Copyright © Huawei Technologies Co., Ltd.
7 Connecting Cables
48