14.1 Flexmotion - Siemens EX8 NV Series Information For Use

14 flexMotion
You can use this function in the flexible cooking zone
to transfer the programmed power level and cooking
time from one cooking zone to another.
14.1 flexMotion
Requirement: Move the cookware to a cooking zone
which is not switched on, which you have not yet pre-
set and on which no other cookware has been placed.
15 fryingSensor
Suitable for cooking or reducing sauces, pancakes or
frying eggs with butter, for frying vegetables or steaks
up to the required level of boiling, and for keeping the
temperature under control.
Instead of frequently adjusting the power level during
cooking, select the required target temperature once at
the start. The sensors under the glass ceramic meas-
ure the temperature of the cookware and keep this
constant throughout the entire cooking process.
This function is available on all cooking zones marked
with this symbol ​ ⁠ .
15.1 Advantages
¡ The temperature is automatically kept constant
without you having to change the power level.
¡ Oil does not overheat. This prevents the food from
burning.
¡ The cooking zone only continues heating for as long
as this is necessary to maintain the temperature.
This saves energy.
15.2 Temperature levels
Temperature levels for preparing meals.
Level Temper- Functions
ature
1 120 ºC Boiling and reducing
sauces, fry veget-
ables
2 140 ºC Searing in olive oil or
butter
3 160 ºC Frying fish and
coarse foods
4 180 ºC Deep-fat frying
breaded, frozen and
grilled food
1.
2.
a The settings are transferred to the new cooking
Level Temper-
5
15.3 Recommended cookware
Special cookware has been developed for this function,
which delivers the best results.
Cookware
Frying pan, 21 cm dia-
meter
Teppanyaki
Grill
The recommended cookware is available from cus-
tomer service, specialist retailers or our online shop
siemens-home.bsh-group.com .
Note: You can also use other cookware. Depending on
the composition of the cookware, the achieved temper-
ature may differ from the selected temperature level.
15.4 Switching on the fryingSensor
Cookware
1.
2.
3.
a The functions starts.
a Once the target temperature has been reached, a
4.
Note: If you need to cook with more than 250 ml oil,
add the oil and wait a few seconds before you add the
food.
Move the cookware.
The cookware is detected and the previously selec-
ted power level and ​ ⁠ flash alternately on the dis-
play for the new cooking zone.
Select the new cooking zone to implement the set-
tings.
The appliance sets the power level for the original
cooking zone to ​ ⁠ .
zone.
Functions
ature
215 ºC High-temperature grill
and griddle plate
​ ⁠
​ ⁠
Place empty cookware on the cooking zone.
Touch ​ ⁠ and then select the cooking zone.
Within the next 10 seconds, select the required tem-
perature setting on the control panel.
get temperature is reached.
signal tone sounds and
Add the frying fat and then the food to the frying
pan.
flexMotion en
Cookware
Recommended cooking
zone
Single cooking zone
Flex Zone
Flex Zone
​ ⁠ flashes until the set tar-
​ ⁠ stops flashing.
13