Do you have a question about the T3058 and is the answer not in the manual?
Questions and answers
Summary of Contents for Technisonic Industries Limited T3058
Page 1
T3058 RF Module P/N127502-6 Users Guide DOCUMENT NO: 136576 REVISION: DATE OF ISSUE: JULY 08, 2013 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 www.til.ca This document contains designs and other information which are the property of Technisonic Industries Ltd. This document may not in whole or in part, be duplicated or disclosed or used for manufacture of the part disclosed herein, without the prior written permission of Technisonic Industries Ltd.
Page 2
INTRODUCTION The T3058 RF module is a Dual Band transceiver assembly that operates in 450-512 MHz and 764-870 MHz range. The T3058 RF module is a modified Motorola APX 7000 UHF LHI/700/800 MHz portable radio. The outer casing, top controls, front display and keypad are removed. The RF chassis is slightly machined but all electronic circuits are unmodified from the original APX 7000 radio.
NOTES ESD CAUTION This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves when handling printed circuit boards. FCC COMPLIANCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Current: 300 mA minimum / 2.4A maximum Ω Audio Output Power: 500 mW into 600 FCC ID: IMA-T3058 INDUSTRY CANADA: 120A-T3058 RF Output Power: 1 or 5 Watts (UHF HI) 1 or 2.5 Watts (700 MHz) 1 or 3 Watts (800 MHz)
Page 5
“TDFM-9000 FINAL ASSEMBLY SSP". FCC ID LABELS The T3058 RF module is a modified Motorola APX 7000. Part of the modification requires removal if the original Motorola FCC ID label. After all modifications are done the new Technisonic FCC/IC ID label is applied.
Page 6
FIGURE 4: FCC/Industry Canada Label placement on the T3058 Module The T3058 is intended to be mounted in the TDFM 9000 chassis and is not visible. Therefore, a second label must be applied to the outside of the TDFM 9000 that contains the following text: “TDFM 9000 Multiband Transceiver.
Changes or modifications not expressly approved by Technisonic Industries could void the user’s authority to operate the equipment. This manual is designed to provide information about the T3058 RF Module. Every effort has been made to make this manual as complete and accurate as possible.
Need help?
Do you have a question about the T3058 and is the answer not in the manual?
Questions and answers