Danger Sidekick LX Reference Manual page 10

BLUETOOTH HANDS-FREE HEADSET OR CAR KIT To use a
Bluetooth hands-free headset or car kit, do the following:
1 Press to go to the Jump screen. Press
JUMP
the menu, then select Bluetooth to open the submenu. Make
sure Bluetooth features are "on".
2 While you are in your car, make sure your hands-free headset or
car kit is ready to pair by following the manufacturer's instruc-
tions. On your Sidekick, go into the Phone application. Press
and select Settings > Pairing.
MENU
3 From the Pairing dialog box, select your Bluetooth hands-
free headset or car kit from the list of devices (it may take a
few seconds for the list to populate). If prompted, type the
device's PIN code, then press
Code dialog box.
4 By default, your call's sound will go through the device
to open
MENU
to dismiss the PIN
DONE
handset. To send or receive your call using a Bluetooth
device, press
MENU
select your Bluetooth device from the submenu.
 Transfer the call's sound either before or during a call.
5 Place your call.
6 When finished with your call, press
STEREO HEADSET JACK Always connect your headset to your
device before making/receiving a call.
To use the headset button:
Press the button once to answer a call and again to end it.
n
During a call, press once to answer a second incoming call
n
and put the first caller on hold.
With two callers on the phone, press the button once to end the
n
active call and press again to resume the on-hold call.
-10-
and select Transfer Sound to, then
.
END CALL