Advertisement
Accessories
The following accessories (2 x filter/bagged) are included.
Air filter (longer filter with 5 rows of intake vents) x 1
Air filter (shorter filter with 3 rows of intake vents) x 1
Attention
Dispose of the packaging materials properly after unpacking the product.
z
Replacing the Lamp unit & Air filters
Notes on replacing the lamp unit
J
• The light source lamp is a glass component. If it is hit on a hard object or dropped,
breakage may occur.
Be careful when handling a light source lamp.
• A Phillips screwdriver is necessary when carrying out replacement.
Hold the screwdriver firmly.
• Grip the handle when you remove the lamp unit. Some parts of the lamp unit are
sharpened and may cause injury.
• Do not disassemble or modify the lamp unit.
• The lamp may be ruptured. Care should be taken not to scatter pieces of the broken
lamp glass when replacing the lamp unit. Pieces of the broken lamp may fall from the
lamp unit especially when the projector is mounted on the ceiling, so when replacing
the lamp unit do not stand directly underneath it or position your face close to it.
• The lamp contains mercury. Contact the local government office or distributor for the
correct disposal of the old lamp unit.
Attention
When the projector is mounted on a ceiling, do not work with your face close to the
z
projector.
Attach the lamp unit and the lamp cover securely.
z
When you experience difficulty in installing the lamp, remove it and try again. If you
z
use force to install the lamp, the connector may be damaged.
Be sure to use the lamp unit specified.
z
Do not loosen other than designated screws.
z
Please replace the air filters together when replacing the lamp unit.
z
After replacing the lamp unit, make sure to reset the usage time in the [Clear Lamp
z
Hours] menu.
- 7
ENGLISH
Advertisement
