Table of Contents
Advertisement
Quick Links
SUMAKE
Specification:
Blow Per Minute
Needle
Piston Stroke
Overall Length
Air Consumption
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Air Needle Scaler
ST-2555
3,800 b.p.m.
Φ3x180x19pcs
33 mm
13" (330 mm)
10 CFM (285 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
5.94 lbs (2.7 kg)
Noise and Vibration:
Vibration
EN ISO 28927-9
Sound Pressure Level
load: 98.89 dB(A)
Load:
12.97 m/s²
Sound power level
load: 109.89 dB(A)
Uncertainty
K= 1.5 m/s
²
Noise
Remark
EN ISO 15744
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
ST-2555-S-1510G-JI
Advertisement
Table of Contents
Related Manuals for Sumake ST-2555
Summary of Contents for Sumake ST-2555
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty Air Pressure 90 psi (6.3 bar) hearing! K= 1.5 m/s K= 3dB ² Net Weight 5.94 lbs (2.7 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-2555-S-1510G-JI...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR NEEDLE SCALER Model/ Serial No.：ST-2555 to which this declaration applies, complies with these normative documents: ...
- Page 3 Check air system and connections Valve set damaged or broken Disassemble and repair Low revolution rate Not enough air pressure Check air pressure efficiency Motor running abnormal Not enough lubrication, Lubricate or replace parts or unusual noises occur cylinder, piston damaged ST-2555-I-1204C-JI...
- Page 4 ST-2555 AIR NEEDLE SCALER PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 2555-01 Valve Cap 2555-13 Handle Housing 2555-02 O-Ring (d7.8xW2.4) 2555-15 Rubber Handle Grip 2555-03 Valve Spring 2555-16 Anvil 2555-04 Valve Stem 2555-17 Needle Holder (3mm) 2555-05 O-Ring (d4.8xW1.9)
- Page 5 SCALER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 avoiding awkward off-balanced postures. The operator should change posture during extended tasks, which can help avoid discomfort and fatigue. 3. If the operator experiences symptoms, such as persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensations or stiffness, these warning signs should not be ignored. The operator should tell the employer and consult a qualified health professional.
- Page 8 warnings shall indicate the nature of the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-2555 and is the answer not in the manual?
Questions and answers