Table of Contents
Advertisement
This manual only applies to RELiON Lithium
Batteries. It does not apply to other lithium
batteries or chemistries.
1. SAFETY
Lithium Iron Phosphate (LiFePO4) batteries are an inherently safe chemistry.
Please reference RELiON's Lithium Iron Phosphate Safety Document (available at
relionbattery.com) for more details. However, as with any electronics, safety measures
should always be taken. Please adhere to the instructions within this manual for safe
handling and operation.
•
Always wear protective gear when handling batteries
•
Use a wrench with a rubber coated handle
•
Do not place any objects on top of batteries
•
Do not place batteries on a metallic surface
•
Check that all cables are in good condition
•
Make sure all cable connections are properly tightened
•
Install and remove batteries using the lifting handles provided
•
Keep sparks, flames and metal objects away from batteries
•
Have RELiON's SDS on the premises
•
Have an ABC extinguisher of the following type: a foam extinguisher, CO2,
ABC dry chemical, powdered graphite, copper powder or soda (sodium
carbonate) on the premises
•
Do not install batteries in a zero-clearance compartment, overheating may
result. Always leave at least 4" of space around all sides and top of battery
•
Keep any flammable/combustible material (e.g., paper, cloth, plastic, etc.) that
may be ignited by heat, sparks, or flames at a minimum distance of two feet
away from the batteries
•
Battery compartment and any material within two feet should be noncombustible
6
Advertisement
Table of Contents
