Page 1
XYZ Machine Tools Ltd. While every effort has been made to include all the information required for the purposes of this guide, XYZ Machine Tools Ltd. assumes no responsibility for inaccuracies or omission and accepts no liability for damages resulting from the use of the information contained in this guide.
Page 2
Replace the transparent panels in accordance with the stated schedule, regardless of their apparent condition (see the FAQ on our website for why this is important). XYZ Machine Tools ProtoTRAK RMX TMC control, Safety and Quick Start Guide...
Page 3
Do not use compressed air to remove swarf or clean the machine. This can damage the slideway seals and create coolant mist which can be harmful. XYZ recommend the use of BioConcept cutting fluids which do not present a risk to the respiratory tract.
To prevent fires, keep flammable materials and fluids away from the machine, hot swarf and workpieces. • Stop and disconnect the power to the machine before undertaking any cleaning or maintenance. Operating Controls XYZ Machine Tools ProtoTRAK RMX TMC control, Safety and Quick Start Guide...
Page 5
• The large LCD screen and fly out windows allow you work with everything you need at the same time without flipping between screens. XYZ Machine Tools ProtoTRAK RMX TMC control, Safety and Quick Start Guide...
Page 6
If the door is closed, the machine is fully operational regardless of the position of this switch. However, once the door is unlocked and opened, the machine behaves differently depending on the switch position: XYZ Machine Tools ProtoTRAK RMX TMC control, Safety and Quick Start Guide...
Page 7
• RSG: A Remote Stop Go control (option) may be plugged into this port. It provides the same function as the CYCLE STOP/GO keys on the Run Panel. XYZ Machine Tools ProtoTRAK RMX TMC control, Safety and Quick Start Guide...
Enable Button: See the description of the PRODUCTION/SETUP Switch. Axis Selection Switch: Selects the axis under control of the MPG handwheel. The HH MPG is common to other XYZ machines which have a 5 axis. However, the TMC range does not have a 5 axis option.
Please refer to the Operating Manual for full operating instructions. Maintenance Please refer to the maintenance schedule on the machine or in the service manual for important maintenance activity. XYZ Machine Tools ProtoTRAK RMX TMC control, Safety and Quick Start Guide...
Page 10
The warranty period starts on the date of the invoice to the original purchaser from XYZ Machine Tools Ltd (XYZ) or their authorised distributor. If a unit under warranty fails, it will be repaired or exchanged at our option for a properly functioning unit in similar or better condition. Such repairs or exchanges will be made carriage paid within the UK mainland.