Intended Use - FEUERHAND Baby Special 276 LED Instructions For Use Manual

COMPONENTS
1. Carrying handle
2. Lifting eye
3. Chimney
4. Holm
5. Glass with wire holder
6. Wire holder bracket
7. LED illuminant
8. Fuel filler cap/ on/off switch/ dimmer
switch
9. Tank Lithium-ion/ 3 AA battery compart-
ment and power indicator light
10. USB-C port with silicone seal to protect
against dirt and red and green lights to
indicate charging status
BEFORE USING THE FEUER-
HAND LED LANTERN BABY
SPECIAL 276
Check your product for damage after un-
packing and before each use.
If this is the case, do not use the item and
notify your dealer.

INTENDED USE

The Feuerhand LED lantern Baby Special 276
is the LED version of the iconic petroleum
lantern Baby Special 276, which goes back
to a tradition of over 130 years. In design
and appearance, it resembles the classic
storm lantern and offers modern lighting.
It is suitable for indoor areas, for private
living areas (IP20) and as emergency lighting.
Made of galvanised sheet steel, the lantern
is resistant to corrosion. The powder-coated
Feuerhand LED lantern Baby Special 276 is
available in numerous colours that stand out
everywhere. The heat-resistant and shatter-
proof glass optimally protects the lantern
from external influences. Thanks to the long
light duration, the LED version of the Baby
Special 276 ensures numerous cosy hours
in the outdoor living room.
The Feuerhand LED lantern is intended for
room lighting in the household, but not for
commercial use. The lantern is protected
against light contact and solid foreign bodies
with a diameter of more than 12 mm. It is not
protected against the ingress of moisture.
Therefore, it is not suitable for the bathroom
or wet areas and is not rainproof. The appli-
ance must not be used for any purpose other
than that described in these instructions for
use, as this may result in damage or injury.
DE
EN
FR
DA
FI
EL
IT
JA
NL
NO
PL
SV
ES
17