What To Expect; How To Use Your Lumea Prestige - Philips Lumea BRI940 Manual

What to expect

After initial phase
During touch-up phase

How to use your Lumea Prestige

A Remove hair & clean your skin
Touch-up treatment schedule
Perform a treatment every 4 weeks. Repeat this 8 times to achieve effective hair
reduction. This is to maintain results and enjoy smooth skin for months.
-
We advise you to perform a treatment within 4 days before or after the
planned treatment date.
-
The results may vary based on your individual hair growth and also across
different body areas.
-
If you have completed the touch-up phase and you see the need to continue
treatment (hair starts coming back), we advise you to restart the initial
phase.
Note: Using the device more often does not enhance the effectiveness.
Tip: Mark the treatment schedule on your calendar to remind yourself of the
planned treatments.
-
After the first treatment, it can take 1 to 2 weeks for the hairs to fall out. In
the first weeks following the initial treatments, you still see some hairs
growing. These are likely to be hairs that were not in their growing phase
during the first treatments.
-
After 2-3 treatments, you should see a noticeable reduction in hair growth.
However, to effectively treat all hairs, it is important to keep on treating
according to the recommended treatment schedule.
-
After 4 treatments, you should see a significant reduction of hair growth in
the areas that you treated with Lumea. A reduction of hair density should be
visible as well.
-
Keep on treating with frequent touch-ups (every 4 weeks) to maintain the
result.
1 Remove hair before every treatment as long as hair is still visible. You can
either shave, epilate or wax. Make sure you start to treat before new hair is
visible on your skin. If you choose to wax, wait 24 hours before you use
Lumea.
English
13