Page 1
T E R R A A S S E M B L Y I N S T R U C T I O N S P.9-11 Acces sories D esigner Vanities &...
Page 2
B E F O R E Y o u B e g i n 1. Tools and materials needed: Phillips Tape Stud Marker Drill Level Screwdriver Measure Finder 2. Product dimensions: 3. Damaged product: DO NOT USE if product and/or components are broken 4.
Page 3
S T E P 1 P r e p a r e f o r I n s t a l l a t i o n 1. Using the stud finder and marker, locate and mark the studs behind the wall Important: if the studs do not line up for your vanity, wood blocking can be installed between studs 2.
Page 4
S T E P 2 S e c u r e V a n i t y t o W a l l 1. With two adults, carefully lift vanity onto the wall cleats, mating with Cleat B and resting flush against the wall 2.
Page 5
S T E P 3 A d j u s t t h e G l i d e s ( i f r e q u i r e d ) 1. If vanity drawers are misaligned, adjust glides Located at the bottom of the drawer Height adjustment...
Page 6
S T E P 4 R e m o v i n g D r a w e r ( i f r e q u i r e d ) 1. Pull out the slide lock which is located at the bottom of the drawer 2.
Page 7
S T E P 5 I n s e r t i n g D r a w e r ( i f r e q u i r e d ) 1. Pull drawer glides all the way out 2.
Page 8
For standard cleaning, we recommend using warm water with vinegar. DO NOT USE abrasive products or cream cleansers. NEVER USE petroleum-based products when cleaning, i.e. paint thinners or other solvents, as they may damage the wood THANK YOU FOR YOUR BEMMA PURCHASE...
Need help?
Do you have a question about the TERRA and is the answer not in the manual?
Questions and answers