Advertisement
Quick Links
Manufacturer
Telephone
Fax
e- mail
website
These Instructions for Use are a translation of the original Instructions for Use and must be kept for the entire lifetime
As part of the device described here, this document must be made available to every user in a suitable form.
Distribution and reproduction of this document, use and communication of its contents are prohibited unless expressly permitted.
Datum
Rev.
Date
0
23/02/2021
Compiled by
1
2
3
Date: 23/02/2021
Instructions for Use
Duplex Filter Type F101
of the Duplex Filter!
Infringement will result in legal action for damages.
All rights reserved for the case of patent, utility model or design registrations.
Beschreibung
Description
Subject to change without notice
: Georg Schünemann GmbH
Buntentorsdeich 1
28201 Bremen / Deutschland
:
+49 421 55909-10
:
+49 421 55909-40
:
info@sab-bremen.de
:
www.sab-bremen.de
D. Szisnat
Erstellt
Geprüft
Created
Checked
M. Stark
D. Band
Freigegeben
Approved
Advertisement
Summary of Contents for SAB F101
- Page 1 Instructions for Use Duplex Filter Type F101 : Georg Schünemann GmbH Manufacturer Buntentorsdeich 1 28201 Bremen / Deutschland Telephone +49 421 55909-10 +49 421 55909-40 e- mail info@sab-bremen.de website www.sab-bremen.de These Instructions for Use are a translation of the original Instructions for Use and must be kept for the entire lifetime of the Duplex Filter! As part of the device described here, this document must be made available to every user in a suitable form.
- Page 2 No changes may be made to the duplex filter without the approval of SAB! Our current "General Terms and Conditions of Sale and Delivery" which can be viewed on the SAB website (see cover page for web address) are always applicable.
- Page 3 Information If required, SAB Service will be happy to provide help and further information (for contact details, see cover page). Any use other than that specified under "Intended use of the duplex filter" and under "Technical Data" shall be considered as non-intended use.
- Page 4 Storage Information SAB shall not be liable for damage to the duplex filter if it is stored for longer than 6 months from the date of delivery. The correct storage is the responsibility of the consignee. It must be ensured for storage that the delivery is placed in a secured and roofed place or covered with a tarpaulin to protect it from moisture and that spigots, screw connections as well as attachment parts remain unstressed.
- Page 5 (10) (11) (12) (13) (14) (15) Filter B Filter A Fig. 1 Components of the duplex filter Pos. Description Pos. Description Pos. Description Drain screw Clamp (F101D) Seal Housing Hexagon nut (F101D) Hexagon nuts (F101DS) Strainer insert Hexagon head bolt (F101D) Studs (F101DS) Cover Change-over lever...
- Page 6 Submissions to the factory / complaints If the duplex filter is returned to SAB for major repairs or servicing or in the event of a complaint, it must be emptied. In addition, it must be decontaminated when used with hazardous substances.
- Page 7 Technical Data Conte Filter PN ØD H1 H2 H3 H4 H5 L1 L2 L3 L4 L5 Ød surface appro mm mm mm mm mm mm mm mm mm mm mm dm³ m³/h cm² x. kg 15/20 105 160 260 105 148 0.55 115 200 295 135 160 100 105 140 245 370 165 190...