Remote Solution SAFE-T-RACK SR-U SDB-15VCPW-1223 Operation Manual

Advertisement

©
SR-U
Cutler Hammer
VCPW - Open Door
2400-4160kV
1200-2000A
REMOTE SOLUTIONS, LLC
2475 N. Jackrabbit Avenue • Tucson, AZ 85745 • (520) 628-4378 • FAX (520) 628-4568 • Safe-T-Rack.com
SDB-15VCPW-1223
Distance is the best arc protection
Operation
O
ur products are built to spec in our
23,000 sq ft., state-of-the-art facility
by our team of designers and
engineers in Tucson, Arizona. Each
product
is
custom
individually fit each breaker, cubical
door, switch gear, or variant so you
know you're getting the safest, most
reliable product on the market. We
built the best so your team stays safe.
Manual
designed
to

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SAFE-T-RACK SR-U SDB-15VCPW-1223 and is the answer not in the manual?

Questions and answers

Summary of Contents for Remote Solution SAFE-T-RACK SR-U SDB-15VCPW-1223

  • Page 1 Operation Manual © SR-U SDB-15VCPW-1223 ur products are built to spec in our Cutler Hammer 23,000 sq ft., state-of-the-art facility by our team of designers and engineers in Tucson, Arizona. Each VCPW - Open Door product custom designed individually fit each breaker, cubical 2400-4160kV door, switch gear, or variant so you know you’re getting the safest, most...
  • Page 2 © © lways observe all safety precautions and use all personal protective equipment (PPE) as required by Local Site Procedures. This equipment is designed to minimize exposure risk to the operator. Please use the cables, explained below, to attain a safe distance from the breakers during racking. Always use appropriate PPE. Above all, adhere to site specific regulations and requirements.
  • Page 3 © © s noted in the Overview, the SDB is equipped with a Tool Adapter Assembly (TAA). he Portable Kit includes two 28V batteries. Before connecting the battery to the system, The Motor Drive Unit (MDU) is equipped with a quick-connect tool coupling, which uses make sure the battery is fully charged and is attached to the MDU.
  • Page 4 © © he Handheld Controller connects to the MDU via a 50’ Automation Cable. If necessary o ensure longevity from the Portable Kit and the Smart Drive Bracket, store the tools in three cables may be tethered to achieve a safe distance of 150’ . Once plugged in and the provided polymer case in a dry, temperate environment.

Table of Contents