Koala Kare ECO KB833 Assembly Instructions

KB833
® ®
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Please Note:
Product is intended for children able to sit
up unaided and up to 3 years or a maximum weight of 15
kg.
Restraint Usage:
To fasten the waist strap, push spring
tabs into the buckle receptacle until both lock in place with
an audible "click".
The waist restraint can be adjusted to make the strap
tighter or looser.
You are responsible for the safe operation of this unit.
Inspection Criteria - A properly maintained unit:
Has both ends of a functioning, non-frayed strap:
•
buckle clicks when closed and is attached at both
ends on seat bottom.
Has a non-frayed crotch strap firmly attached to both
•
the safety bar and seat bottom.
Has an intact warning label affixed to the seat back.
•
(If damaged or unreadable, please replace.)
All plastic parts firmly attached by provided hardware,
•
and should be tightened as necessary.
A. Left Side
F. Screws
(14 required)
The screws come with a nylon patch already applied, so there is
no need to apply a chemical to prevent the screws from loosening.
To order replacement parts call 888.733.3456 or 303.539.8300 or visit www.koalabear.com
ECO High Chair Assembly Instructions
KB833-KD Package Contents
C. Seat Back
B. Right Side
WARNING:
Prevent serious injury or death from falls or sliding out. Do not
leave child unattended.
Always use the restraint system. Make sure harness is correctly
fitted to child before use.
The child should be secured in the high chair at all times by
the restraining system. Falling hazard: Prevent your child from
climbing on the product.
Always keep child in view while in the high chair. Never leave the
child unattended.
It is recommended that the high chair be used only by children
capable of sitting upright an unassisted.
Do not use the product unless all components are correctly fitted
and adjusted. Do not use product if any part is broken, torn or
missing.
Be aware of the risk of open fires and other sources of strong heat
in the vicinity of the high chair.
Be aware of the risk of tilting when your child can push its feet
against a table or any other structure.
Maintenance:
Clean and sanitize regularly.
Wipe down the ECO High Chair with a soft rag using a
non-abrasive cleaner.
Important: DO NOT USE BLEACH on this product. May
cause discoloration. Use of bleach on this product will
void warranty. Do not use abrasive cleaners as they can
scratch the product.
D. Seat / Safety Bar
Strap Assembly
&
G. Dowel Nuts
(14 required)
E. Lower Support Bar
(2 required)
H. Hex L Key
(Allen Wrench)