Advertisement
5.6.
Mounting holes for an additional power rail (EL34USBB - not included) are provided at both ends of the cabinet and mounting bolts
(item 4) are provided with the cabinet.
IMPORTANT: To avoid tipping, open one drawer at a time and close and secure all drawers whilst moving the rollcab/units.
FIG.1
FIG.3
6.
MAINTENANCE
6.1.
Periodically lubricate wheel axles and tighten all nuts and bolts.
6.2.
Keep all surfaces clean. Brush off and wipe down with damp cloth and mild detergent to maintain finish.
6.3.
Lubricate the drawer slides sparingly every six months.
6.4.
Stubborn grease and oil marks can be removed by using a non-abrasive cleaner.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please
email or call our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 5 years from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
FIG.2
FIG.4
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AP6310.V2
Issue 2 (H,3,F)
REGISTER YOUR
PURCHASE HERE
25/09/23
Advertisement
