Advertisement
4.
Press the pedal on right side to lock in open position, open the
faucet, and adjust it to the desired water temperature and flow rate.
As long as the pedal is depressed, water will flow from the faucet.
To release the pedal, press on the left side.
When the pedal is released, the water flow stops.
CAUTION:
During installation, avoid bending valve actuating. Any bending needs to be
smooth.
500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: orders@airgap.com
Copyright 2018 AIR GAP INTERNATIONAL
AG250-103
Model:
TAP-A-FLOW™
KITCHEN PEDAL WITH
CONSTANT FLOW LOCK
STAINLESS STEEL FINISH
Part No.
AG250-103
Doc. # 400-0788-001
Placentia, California
Advertisement
Table of Contents
Summary of Contents for AIR GAP TAP-A-FLOW AG250-103
- Page 1 When the pedal is released, the water flow stops. CAUTION: During installation, avoid bending valve actuating. Any bending needs to be smooth. Part No. AG250-103 Copyright 2018 AIR GAP INTERNATIONAL 500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: orders@airgap.com Doc. # 400-0788-001...
- Page 2 AG250-103 Installation Procedures LIST OF PARTS ENCLOSED 1 – Pedal assembly AG250-103 1 – Top mounting plate Pedal 2 – #10 Mounting screws The AG250-103, in combination with AG250-002 valve, provides hands-free AG250-002 faucet operation. Cold/Hot Potable Water Mechanical Valve AG250-103 has constant lock option.
Need help?
Do you have a question about the TAP-A-FLOW AG250-103 and is the answer not in the manual?
Questions and answers