Suunto N3 Instruction Manual page 36

receiving the correct time.
· If your Suunto n3 is exactly one or more full hours away from the correct time, it
is possible that your Time Zone settings are set to a specific time zone. Make
sure that the time zone is set to Set by network. For details, see page 26.
· If you are outside of the MSN Direct coverage area, you can set the time
manually. For details, see page 25.
• My Suunto n3 battery died before I could recharge it. What should I do?
· Do not worry! Just place your Suunto n3 on the charger and it will begin to
charge. All your information comes back online as soon as the Suunto n3 has
enough battery power.
• My Suunto n3 is not responding to any button presses. What should I do?
· Turn your Suunto n3 off and then turn it back on by completing the following
steps:
1.Simultaneously press and release PREVIOUS, STARTSTOP/LIGHT, and
CHANNEL. This turns off the Suunto n3.
2.Wait for a few seconds, and then simultaneously press and release NEXT/LAP,
STARTSTOP/LIGHT, and CHANNEL.
· It takes several seconds for the Suunto n3 to power on, and then a watch face
will appear.
· If your Suunto n3 still does not respond to any button presses, call the Suunto
Customer Service at (toll free) 1 (800) 543-9124 for Suunto USA or 1 (800) 776-
7770 for Suunto Canada.
• I activated the MSN Direct service, but my Suunto n3 is not receiving any of the
information I selected. What should I do?
· You may not have received the activation and configuration message that was
sent when you activated the service. This can happen if you were outside an
34