Advertisement
Quick Links
General Guidelines
• It is the user's responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product's owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and
practice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
Parts
A
E
Part
Description
A
Centering Pin
B
Alignment Tube
C
Axle w/Centering Cones & Rubber Stoppers
D
Support Arm
E
Truing Arm
F
Base
G
Strip of 4 Self-Adhesive Weights
Tools Required
• 2.5mm Allen wrench
Rev. 103015
B
H
I
Quantity
• 5mm Allen wrench
Instructions for
Part # BW-WB-30
F
J
K
Part
Description
2
H
Leveling Foot
1
I
7mm Nut
1
J
Truing Arm Adjustment Bolt
2
K
Allen Head Screw
1
L
Thumb Screw
1
M
8mm Nut
1
C
G
L
M
• 3/4" socket wrench
D
Quantity
4
4
1
8
1
1
Page 1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Black Widow BW-WB-30
- Page 1 Instructions for Part # BW-WB-30 General Guidelines • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all times and review before each use. • It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product.
- Page 2 Assembly 1. Flip the base upside down and install the four leveling feet with one nut per foot. Adjust the feet accordingly for uneven surfaces using the level. 2. Insert the alignment tube through both support arms, assuring the centering pins will meet perfect- ly.
- Page 3 4. Install the centering pins into the support arms. Tighten the pins with a 2.5mm Allen wrench. 5. Install the truing arm adjustment bolt into the slot on either support arm with one nut. Insert the truing arm, then apply the thumb screw to secure in place. 6.
-
Page 4: Wheel Balancing
Wheel Balancing 1. Remove the centering cone and rubber stopper from the axle. Slide it through the center of the wheel. Put the cone and rubber stopper back on the axle. Slide the cones in place and tighten with a 2.5mm Allen wrench. - Page 5 5. Add or remove the appropriate amount of weights to counter balance the wheel. When the wheel stops rotating on its own, then it’s balanced. Wheel Truing 1. Remove the axle from the wheel and install one centering pin. Tighten the pin with a 2.5mm Allen wrench.
- Page 6 Product Warranty and Liability GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.
Need help?
Do you have a question about the BW-WB-30 and is the answer not in the manual?
Questions and answers