Setting Style Watch Faces; Setting The Aod Watch Face; Setting The Standby Watch Face - Huawei 55020ANQ User Manual

Method 3: Check the battery level on a watch face that displays the battery level.
Method 4: When your device is properly connected to the Huawei Health app, open the
Huawei Health app, go to the device details screen, and view the battery level.
Low battery alert
When the battery level is lower than 10%, your device will vibrate to notify you of the low
battery level and prompt you to charge it as soon as possible.

Setting style watch faces

You can create personalized watch faces based on the outfit you're wearing.
This feature is currently not supported with iPhones.
1
Open the Huawei Health app, go to the device details screen, touch the Watch faces
card, and go to More > Mine > Style
2
Touch + in the lower left corner, and upload a photo of your outfit by taking one using
Take photo or selecting one from Gallery.
3
Multiple watch faces will be generated based on the elements in the photo. Select your
favorite option, and touch Save to set it as the current watch face.

Setting the AOD watch face

AOD watch face
After you set the AOD watch face, you can select to display the main watch face or AOD
watch face when you raise your wrist.
1
Open the app list, go to Settings > Watch face, and enable Always On Display.
2
Select Raise to show AOD or Raise to show watch face as needed.

Setting the Standby watch face

Standby watch face
Once you set a Standby watch face, the watch face screen will stay on after your watch
enters standby mode. To enable this feature, perform the following:
1
On the home screen of the device, press the side button, go to Settings > Display >
Always On Display, swipe left or right on the screen to preview the watch faces, and then
touch or the selected watch face to complete the settings.
2
If the screen-off time has not been set for the device: When no operations are performed
on the screen, the Standby watch face will be displayed 5 seconds after Always On Display
is configured. When you perform an operation on the screen, the Standby watch face will
be displayed 15 seconds after the operation is complete.
More
18