Summary of Contents for Flexiheat LEO D S
- Page 1 LEO D S / LEO D S BMS / LEO DT S LEO D L / LEO D L BMS / LEO DT L LEO D XL / LEO D XL BMS / LEO DT XL DESTRATIFICATOR TECHNICAL DOCUMENTATION OPERATION MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. Purpose and Principle of Operation .......... 2 2. Technical Data ................. 3 3. Wiring diagrams ............... 4 4. Installation ................5 4.1. Montage distance ..............5 4.2. Method of installation ............5 5. Start-up and operation ............. 6 6. -
Page 3: Technical Data
2. TECHNICAL DATA LEO D S | LEO D S BMS | LEO DT S LEO D L | LEO D L BMS | LEO DT L LEO D XL | LEO D XL BMS | LEO DT XL LEO D S... -
Page 4: Wiring Diagrams
3. WIRING DIAGRAMS LEO D / LEO DT Hi / N / Pe - 3rd fan speed Med. / N / Pe - 2nd fan speed Low / N / Pe – 1st fan speed When wiring the BMS Leo destratification fans– you ‘Daisy Chain’ them from one DRV module to the next –... -
Page 5: Installation
*with all blades directed downwards In case of installation on surface which transfer vibrations is recommended to use vibration isolator. 4.2. METHODS OF INSTALLATION LEO D S LEO D L LEO D XL Under ceiling montage must be done using each (four) U-section profiles. -
Page 6: Start-Up And Operation
5. START-UP AND OPERATION Start Up Before connecting the power supply check the correctness of connection of the fan motor and the controllers. These connections should be executed in accordance with their technical documentation. Before connecting the power supply check whether the mains voltage is in accordance with the voltage on the device data plate. -
Page 7: Service And Warranty Terms
6. SERVICE AND WARRANTY TERMS Please contact your dealer in order to get acquitted with the warranty terms and its limitation. In the case of any irregularities in the device operation, please contact the manufacturer’s service department. The manufacturer bears no responsibility for operating the device in a manner inconsistent with its purpose, by persons not authorised for this, and for damage resulting from this! -
Page 8: Conformity With Weee Directive 2012/19/Ue
7. CONFORMITY WITH WEEE DIRECTIVE 2012/19/UE Running a business without harming the environment and observing the rules of proper handling of waste electrical and electronic equipment is a priority for F lexiheat . The symbol of the crossed out wheeled bin placed on the equipment, packaging or documents attached means that the product must not be disposed of with other wastes. - Page 9 10 |...
- Page 10 Declaration Of Conformity Flexiheat hereby confirms that heating unit s • LEO D S / LEO D S BMS / LEO DT S • LEO D L / LEO D L BMS / LEO DT L • LEO D XL / LEO D XL BMS / LEO DT XL were produced in accordance to the following Europeans Directives 2014/30/UE –...