Accessory Overview - Vapor Clean Pro6 Duo Owner's Manual

Accessory Overview

Typically used with a microfiber towel clipped around. For more delicate
hard surface floors such as wood, always use with a microfiber towel or
pad.
The Carpet Glider covers the bristles on the floor brush, allowing the user
to sanitize rugs and carpets without damaging the fibers. Can be used with
or without a towel clipped on. The glider can be removed when you are
ready to clean hard surface floors.
Carpet Glider Disassembly
To remove glider, use the open side (fig.1). Release the locking fixtures by
tapping gently (fig.2 and fig. 3) to remove the glider cover completely (fig.4).
Carpet Glider Re-assembly
To assemble glider, position accessory on the floor brush (fig. 5). Press so
that the glider slides neatly in the grooves (fig. 6) until it reaches the locking
fixtures (fig. 7). To lock in - tap lightly (fig. 8) until the bristles are aligned
evenly with the glider.
Set steam setting to medium to low. Then disassemble the glider and clean
with the brush wrapped in a microfiber towel or pad.
For stubborn dirt or residuals of previously used chemicals, several
treatments may be necessary in order to obtain a satisfactory and even
result. For subsequent treatment, repeat the procedure using a dry rag
wrapped on the brush.
1 x Rectangle Floor Brush w/ Clips & Carpet Glider
This brush is for all hard surface floors such as tile,
wood, linoleum, concrete etc.
Carpet Glider
Cleaning Hard Surface Floors
Cleaning Carpets & Rugs
6