Table of Contents
Advertisement
X6DVL-EG2 User's Manual
2-2
Xeon EM64T Processor and Heatsink Installation
When handling the processor package, avoid placing direct
pressure on the label area of the fan. Also, do not place the
!
motherboard on a conductive surface, which can damage the
BIOS battery and prevent the system from booting up.
IMPORTANT: Always connect the power cord last and always remove it
before adding, removing or changing any hardware components.
sure that you install the processor into the CPU socket before you install
the CPU heatsink. Note that for the X6DVL-EG2 you need to install the Xeon
mounting plate under the board.
Installing the CPU Mounting Plate
(*Note: CPU Retention Brackets are
pre-installed.)
CPU Installation
1. Lift the lever on the CPU socket:
lift the lever completely as shown
on the picture on the right; other-
wise,
you will damage the CPU
socket when power is applied. (In-
stall CPU1 first.)
Mounting Holes
Xeon CPU
CPU Socket
CPU Retention
Bracket
CPU Mounting
Plate
CPU Socket
Motherboard
Mounting Plate
2-2
Heatsink
Mounting
Holes
Heatsink
Socket lever
Make
CPU
Advertisement
Table of Contents
