Advertisement
4. APPLICATIONS
R134a hi & low side port
A/C service port
5. OPERATION
WARNING! Pressurised refrigerant may be present in hoses. De-pressurise system
‰
before use. Never direct hoses toward yourself or any other persons.
5.1.
Select the correct support plate to fit the tube or line fitting, locate over the connection
and turn the clamp screw until the cone is seated against the end of tube.
5.2.
While holding the clamp screw by hand, Rotate the force nut 1/4 turn. The leak test gas
system can now be connected ensuring gas safety procedures and instructions are followed.
6. MAINTENANCE
6.1.
Generally keep clean from dirt and grime to improve product life.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling
centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires
disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations .
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
3/4" & 1/2"
3/8"
01284 703534
sales@sealey.co.uk
Original Language Version
1" hex & 7/8"
1/4" MFL
www.sealey.co.uk
VSAC135 Issue 2 (ALL) 17/05/23
Advertisement
