Page 1
User’s Manual 900 MHz Daughter Board VSUB075 Note: Required information is contained on pages two and three Vantage Controls 1061 South 800 East Orem, UT 84097 (801) 229-2800 June 13, 2001...
Page 2
IMPORTANT: This device operates with a modular transmitter FCC ID: PII- VSUB075. In order to comply with the FCC RF exposure requirements, this product must be installed and operated in such a way that a minimum separation distance of 20 cm (approximately 8 inches) is maintained from the antenna to any persons.
Page 3
MHz ISM frequency band. Integrating the VSUB075 Into Products IMPORTANT: The VSUB075 radio has been certified by the FCC as a module for integration into products without further certification being necessary (as per FCC section 2.1091.) The following requirements must be satisfied in order to...
Page 5
RF Data Rate ................19,200 bps Interface Data Rates ............9600-54600 bps Size ..................2.75” x 1.47” Operating Temperature Range ............. -40-70°C ** All information on this page “Specifications” shall be supplied to the end user of any product the VSUB075 is incorporated into.