USBRECORDING
C onnectingexternaldatamedia
Notes:
It is advised to put the television on stand-by
7
mode before connecting the Skype camera.
Before disconnecting the external data me-
7
dium, the television must first be switched to
standby, otherwise files can be damaged.
There are three USB inputs on the television,
7
namely USB1, USB2 and USB3.
USB1andUSB2input is intended for USB
devices that require additional power (e.g.
external hard disk).
SERVICE
HDMI4
SATELLITE
Optic Out
LAN
USB3
HDMI3
(ARC)
13/18V max.500mA
ANT-IN
(MAIN)
(SUB)
5 V max.50mA
MAIN
SUB
1
Plug the external hard disk to the USB1or
USB2 USB interface of the television;
or
plug the memory stick in the USB3 socket
of the television.
46
ENGLISH
-------------------------------------------------------------------------------------------
Notes:
The socket USB3 of the television supports
7
500 mA current according to the USB stan-
dard. Devices such as external hard disk
and etc. that consume more power can only
be connected to the USB1andUSB2USB
interface of the television.
If you are using a power cable for the
7
external hard disk that you have connected
to the USB1andUSB2 USB interface,
then the power cable of the external hard
disk must also be unplugged when the TV is
turned off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.