Troubleshooting; Technical Specification - Crown VCP 32 Instruction Manual

Trouble shooting
Before calling the customer services,please check that the appliance is
correctly connected,any of the following cases are not covered by the
guarantee
> Damage caused by improper use,storage or maintenance.
> Damage caused by unauthorised disassembly and repair.
> Damage caused by misuse.
> Using the ceramic hob for commercial purposes.
If an abnormality comes up,the ceramic hob will enter the protective state
automatically and display corresponding protective codes:
Error
Message
Water or pot on the glass over the
E1
control
The temperature inside the
E2
appliance was too high
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the ceramic hob and please contact the supplier.

Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
Possible Cause
Clean the user interface
The appliance must be stopped
and cooling
CROWN VCP 32
2 Zones
220-240V~
3000W(230V~)
290X520X47
265X500
29
What to do