1. Manuals
  2. Brands
  3. Crown Manuals
  4. Dishwasher
  5. DWC 4504A WH
  6. User manual

Crown DWC 4504A WH User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
EN
Dishwasher / User Manual
DWC 4504A WH / DWC 4507A SL

Advertisement

Table of Contents
loading

Summary of Contents for Crown DWC 4504A WH

  • Page 1 ® Dishwasher / User Manual DWC 4504A WH / DWC 4507A SL...
  • Page 2 Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.

  • Page 3: Table Of Contents

    CONTENTS 1.SAFETY INSTRUCTIONS ....................1 1.1. General Safety Warnings ....................1 1.2. Installation Warnings .....................2 1.3. During Use........................3 2.INSTALLATION ......................... 6 2.1. Machine Positioning .....................6 2.2. Water Connection ......................6 2.3. Water Inlet Hose ......................6 2.4. Drain Hose........................7 2.4. Electrical Connection ....................7 3.TECHNICAL SPECIFICATIONS ..................
  • Page 4 8.CLEANING AND MAINTENANCE ................. 19 8.1. Filters ........................... 19 8.2. Spray Arms ........................19 8.3. Drain Pump ........................20 9.TROUBLESHOOTING ....................21...

  • Page 5: Safety Instructions

    1. SAFETY INSTRUCTIONS 1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.

  • Page 6: Installation Warnings

    2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void.

  • Page 7: During Use

    pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection. 3. During Usage • This machine is for domestic use only; do not use • it for other purposes. Commercial use will void the guarantee. Do not stand, sit or place loads on the open door of the dishwasher.
  • Page 8 the door for one minute after it has opened. For effective drying, keep the door open for 30 minutes after a programme has ended. Do not stand in front of the door after the auto-open signal sounds. In the case of a malfunction, repair should only be performed by an authorised service company, otherwise the warranty will be void.
  • Page 9 CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste.

  • Page 10: Installation

    2. INSTALLATION WARNING: Use the new water inlet hose supplied with your machine, do not use an old machine’s hose. 2.1. Machine positioning WARNING: Run water through the When positioning the machine, place it in an area where dishes can be easily loaded new hose before connecting.

  • Page 11: Electrical Connection

    WARNING: After removing the 2.5. Electrical connection top panel of your dishwasher, the machine should be placed in a WARNING: Your machine is set to space of the dimensions shown operate at 220-240 V. If the mains voltage in the figure below. supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection.

  • Page 12: Technical Specifications

    3. TECHNICAL SPECIFICATIONS 3.2. Technical specifications 10 place Capacity settings Dimensions (mm) Height 850(mm) Width 450(mm) Depth 598(mm) Net weight 40 kg Operating 220-240V voltage / 50 Hz, frequency Total current 10(A) 3.1. General appearance 1. Worktop Total power 2. Upper basket with racks 1900(W) 3.

  • Page 13: Before Using The Appliance

    4.3. Fill the salt (IF AVAILABLE) 4. BEFORE USING To add softener salt, open the salt THE APPLIANCE compartment cap by turning it counter clockwise. (1) (2) At first use, fill the 4.1. Preparing your compartment with 1 kg salt and water (3) until dishwasher for first use it is almost overflowing.

  • Page 14: Test Strip

    4.4. Test Strip Run water Keep the Shake the Wait Set the hardness level of through tap strip in strip. (1min.) your machine. (1min.) water (1sec) NOTE: Level is set 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.

  • Page 15: Filling The Detergent

    Continued use of too much detergent may set too height, you can see bluish layers on cause machine damage. glass and dishes. Using little detergent can result in poor cleaning and you can see whitish 4.12. Filling the rinse-aid and setting streaksin hard water.

  • Page 16: Loading Your Dishwasher

    5. LOADING YOUR WARNING: To avoid any possible DISHWASHER injuries, place long-handle and sharp- pointed knives with their sharp points facing down or horizontally on the baskets. For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings.
  • Page 17 Upper Basket Top basket Height adjustment Fixed Rack Turn the Rail Stop Clips, at the ends of the Upper basket racks have two positions: rails, to the sides to open them (as shown in open (a) and closed (b). You can place cups the image below), then pull out and remove on the racks to be washed.

  • Page 18: Alternative Basket Loads

    5.2. Alternative Basket Incorrect Loads Loads Lower Basket Top Basket Important Note for Test Laboratories For detailed information required for tests according to EN normatives and a softcopy of the manual, please send the model name and serial number to the following address: dishwasher@standardtest.info Incorrect Loads...

  • Page 19: Programme Table

    6. PROGRAMME TABLE Program Name: Quick 30’ 40°C Super 50’ Intensive 65°C Standard program for normally soiled Suitable for lightly Suitable for normally daily using dishes Suitable for heavily Type of Soil: soiled dishes and soiled daily dishes with reduced soiled dishes.

  • Page 20: The Control Panel

    7. . THE CONTROL PANEL Selection knob to the 'Off' position. During a delay, the light corresponding to the remaining time is switched on. 7.1. Changing a Programme Follow the steps below to change a programme while in operation. Press the Start/Pause button. Rotate the Programme Selection Knob (3) to switch the machine on and select suitable programme for your dishes.

  • Page 21: Cancelling A Programme

    7.2. Cancelling a Programme NOTE: Do not open the door before the programme is complete. Follow the steps below to cancel a programme while in operation. NOTE: Leave the door slightly open at the end of a wash programme to speed up Press and hold the the drying process.

  • Page 22: Cleaning And Maintenance

    8. CLEANING AND To remove and clean the filter combination, turn it counter clockwise and remove it by MAINTENANCE lifting it upwards (1).Pull the coarse filter out of the micro filter (2).Then pull and remove Cleaning your dishwasher is important to the metal filter (3).Rinse the filter with lots of maintain the machine’s service life water until it is free of residue.
  • Page 23 8.3 Drain Pump Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. Warning Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.

  • Page 24: Drain Pump

    9. TROUBLESHOOTING FAULT POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Switch your Dishwasher on by pressing the Your Dishwasher is not switched on. On/Off button. Fuse blown. Check your indoor fuses. The programme does not start.

  • Page 25: Troubleshooting

    FAULT POSSIBLE CAUSE TROUBLESHOOTING Use the correct amount of detergent, as Not enough detergent used. instructed in the programme table. Rinse aid dosage and/or water Increase rinse aid and/or water softener softener setting set too low. level. Whitish stains remains on dishes.
  • Page 26 AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE CODE POSSIBLE FAULT WHAT TO DO Start/ Wash Pause Make sure the water inlet tap is open and water is flowing. Insufficient water Separate the inlet hose from the tap and clean the filter of the hose. Contact for service if the error continues.
  • Page 27 The installation and repairing procedures should always carried out by the Authorised Service Agent in order to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons. Repairs may be carried out by technicians only.
  • Page 28 www.zora.bg 52253525 R35...

This manual is also suitable for:

Dwc 4507a sl

Table of Contents