1. Manuals
  2. Brands
  3. SVOTON Manuals
  4. Barcode Reader
  5. MG-1650S
  6. User manual

SVOTON MG-1650S User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MG-1650S
Barcode Scanner
User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MG-1650S and is the answer not in the manual?

Questions and answers

Summary of Contents for SVOTON MG-1650S

  • Page 1 MG-1650S Barcode Scanner User’s Guide...

  • Page 2: Precautions

    SVOTON Technology Precautions Please read everything in the manual carefully before using the product described in this manual, and read the following notes carefully in order to ensure that the bar code scanning equipment according to the design indicators of safe use, please carefully keep the instructions, so that the future at any time to check.

  • Page 3: Revision History

    SVOTON Technology Revision History Date Version Describe 2018-10-20 Initial version 2018-11-20 Remove invalid content Remove the hand-scanned phone 2018-12-15 barcode, add Han XinCode,modify the manual Chinese word description. 2019-03-15 New series of common feature version manual 2019-08-28 Add some suffix samples;add...

  • Page 4: Table Of Contents

    SVOTON Technology Table of Contents Precautions ....................... 2 Revision History ......................3 Foreword ......................... 10 Brief Introduction .................. 10 Chapter Outline ..................10 Chapter 1 Connection and Basic Settings ............... 11 Introduction ..................11 Unpacking .................... 11 Device Connection ................11 USB Connection ..................
  • Page 5 SVOTON Technology Good Read Delay ................25 Chapter 4 Data Editing .................... 26 Introduction ..................26 Add Prefix or Suffix ................27 Example ....................28 Add a Suffix to a specific symbology ........... 28 To Add a Carriage Return Suffix to All Symbologies ......29 To Add a Line Break Suffix to All Symbologies ........
  • Page 6 SVOTON Technology Message Length .................. 47 NEC 2 of 5 ................... 48 On/Off ....................48 Check Digit ..................48 Message Length .................. 50 Code 93 ....................51 On/Off ....................51 Message Length .................. 51 Straight 2 of 5 Industrial (three-bar start/stop) ........52 On/Off ....................
  • Page 7 SVOTON Technology Expand....................65 Addenda Required ................65 Addenda Separator ................65 Check Digit ..................66 Number System ................... 67 Addenda ....................67 UPC-E1 ....................68 EAN/JAN-13 ..................68 On/Off ....................68 Check Digit ..................69 Addenda ....................69 Addenda Required ................70 Addenda Separator ................
  • Page 8 SVOTON Technology Message Length .................. 80 Aztec Code ..................81 On/Off ....................81 Message Length .................. 81 China Post (Hong Kong 2 of 5) ............82 On/Off ....................82 Message Length .................. 82 Korea Post ................... 83 On/Off ....................83 Message Length ..................
  • Page 9 SVOTON Technology Programming Charts ................103 ASCII conversion of keyboard operation ........... 106 www.svoton.com...

  • Page 10: Foreword

    SVOTON Technology Foreword Brief Introduction This manual provides bar code scanning equipment Start-up and configuration instructions, as well as maintenance and customer support information. Chapter Outline Chapter 1 Connections and Basic Settings :introduces the method and default settings for bar code scanning devices...

  • Page 11: Chapter 1 Connection And Basic Settings

    SVOTON Technology Chapter 1 Connection and Basic Settings Introduction The barcode scanner supports three connection methods. Please follow the appropriate connection procedure to connect the barcode scanner. Unpacking To open the product packaging, perform the following steps: • Remove the scanner and its accessories and inspect for damage during shipment.

  • Page 12: Usb Connection

    SVOTON Technology USB Connection The barcode scanner can be connected to the USB port of your computer. Connect the device interface (RJ45 connector) of the USB cable to the device. Connect the host interface (USB interface) of the USB cable to the host.

  • Page 13: Rs232 Connection

    SVOTON Technology RS232 Connection Connect the device interface (RJ45 connector) of the RS-232 cable to the scanner. Connect the host interface (RS-232 interface) of the RS-232 cable to the host. The barcode scanner is humming. Verify the operation by scanning the...

  • Page 14: Barcode Reading

    SVOTON Technology Barcode Reading The barcode scanner has a line of sight/point that projects a red aiming beam that corresponds to the horizontal field of view of the barcode scanner. The line of sight/point should be at the center of the barcode, but it can be positioned in any direction to facilitate reading.

  • Page 15: Defaults Setting

    SVOTON Technology Defaults Setting Factory Default Setting Scan the "Load Factory Defaults" barcode below to reset the barcode scanner to the factory default settings. (800006.) Load Factory Defaults www.svoton.com...

  • Page 16: Chapter 2 Interface Type

    SVOTON Technology Chapter 2 Interface Type Introduction This chapter introduces the USB and RS232 interface types and lists their related configurations. RS232 Connect RS232 interface, you need to scan the "RS232" barcode, the serial port related configuration is: 115200 baud rate, 8 data bits, no parity, 1 stop bit, add carriage return and line feed by default.

  • Page 17: Rs232 Baud Rate

    SVOTON Technology RS232 Baud Rate Baud Rate sends the data from the scanner to the terminal at the specified rate. The host terminal must be set for the same baud rate as =115200. the scanner. Default (8310030.) (8310031.) (8310032.) 1200 (8310033.)

  • Page 18: Rs232 Word Length: Data Bits, Stop Bits, And Parity

    SVOTON Technology (8310037.) 38400 (8310038.) 57,600 (8310039.) *115,200 RS232 Word Length: Data Bits, Stop Bits, and Parity Data Bits You can choose to transfer 7,8-bit data bits, and you must set the terminal to the same data bit as the barcode scanner to communicate properly.
  • Page 19 SVOTON Technology (8310061.) 7 Data, 2 Stop Parity None (8310067.) 7 Data, 2 Stop, Parity Odd (8310065.) 8 Data, 1 Stop, Parity Even (8310062.) * 8 Data, 1 Stop, Parity None (8310068.) 8 Data, 1 Stop, Parity Odd www.svoton.com...

  • Page 20: Usb

    SVOTON Technology USB PC Keyboard Scan one of the following code to program the scanner for USB PC Keyboard .Scanning these code also adds a CR and LF. （881001124.） USB Keyboard (PC) USB Serial Scan the following code to program the scanner to emulate a regular RS232- based COM Port.

  • Page 21: Chapter 3 Input/Output Settings

    SVOTON Technology Chapter 3 Input/Output Settings Introduction This chapter mainly introduces the configuration of the beep and LED of the barcode scanner when it is powered on, decoded, and triggered by the button. Startup Beeper The scanner can be programmed to beep when it’s started up. Default = Startup Beeper On.

  • Page 22: Good Read And Error Read Indicators

    SVOTON Technology Good Read and Error Read Indicators Good Read Beeper The beeper may be programmed On or Off in response to a good read. Default = Good Read Beeper On (8410010.) Good Read Beeper Off (8410011.) * Good Read Beeper On...

  • Page 23: Good Read Beeper Frequency

    SVOTON Technology Good Read Beeper Frequency The beeper frequency codes modify the frequency of the beep the scanner emits on a good read. Default = Medium. (8410061600.) Low (1600 Hz) (8410062400.) * Medium (2400 Hz) (8410064200.) High (4200 Hz) Good Read Beeper Duration The beeper duration codes modify the length of the beep the scanner emits on a good read.

  • Page 24: Good Read Led

    SVOTON Technology (8410073250. Medium (3250 Hz) (8410074200.) High (4200 Hz) Good Read LED The LED indicator can be programmed On or Off in response to a good read. Default = On. (8410081.) * Good Read LED On (8410080.) Good Read LED Off...

  • Page 25: Good Read Delay

    SVOTON Technology Good Read Delay This sets the minimum amount of time before the scanner can read another barcode. Default = * Short Delay (750 ms) (8510060.) No Delay (851006750.) * Short Delay (750 ms) (8510061000.) Medium Delay (1,000 ms) (8510061500.)

  • Page 26: Chapter 4 Data Editing

    SVOTON Technology Chapter 4 Data Editing Introduction This chapter describes how to add prefixes and suffixes. • Default prefix = None. Default suffix = None. • A prefix or suffix may be added or cleared from one symbology or all symbologies.

  • Page 27: Add Prefix Or Suffix

    SVOTON Technology Add Prefix or Suffix Step 1. Scan the Add Prefix or Add Suffix symbol Step 2. Determine the 2 digit Hex value from the Symbology Chart for the symbology to which you want to apply the prefix or suffix. For example, for Code 11, Code ID is “h”...

  • Page 28: Example

    SVOTON Technology Example Add a Suffix to a specific symbology To send a CR (carriage return)Suffix for code 128. only: Step 1. Scan Add Suffix. Step 2. Determine the 2 digit hex value from the Symbology Charts code 128. Step 3. Scan 6, 3 from the...

  • Page 29: To Add A Carriage Return Suffix To All Symbologies

    SVOTON Technology To Add a Carriage Return Suffix to All Symbologies Scan the following barcode if you wish to add a carriage return suffix to all symbologies at once. This action first clears all current suffixes, then programs a carriage return suffix for all symbologies.

  • Page 30: Keyboard Operation

    SVOTON Technology Keyboard Operation Different operations can be performed on the keyboard through configuration during decoding output, such as automatic saving after decoding output. Step 1: determine the hexadecimal value corresponding to the keyboard operation to be performed from the...

  • Page 31: Clear Prefixes Or Suffixes

    SVOTON Technology Clear Prefixes or Suffixes You can clear a single prefix or suffix, or clear all prefixes/suffixes for a symbology. If you have been entering prefixes and suffixes for single sym- bologies, you can use Clear One Prefix (Suffix) to delete a specific char- acter from a symbology.

  • Page 32: Suffix Selections

    SVOTON Technology (889003.) Clear All Prefixes Suffix Selections (888002.) Add Suffix (888004.) Clear One Suffix (888003.) Clear All Suffixes www.svoton.com...

  • Page 33: Function Code Transmit

    SVOTON Technology Function Code Transmit When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function code to the terminal. Default = Enable. (8870010.) * Enable (8870011.) Disable Intermessage Delay An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be placed between each scan transmission.

  • Page 34: Chapter 5 Symbologies

    SVOTON Technology Chapter 5 Symbologies Introduction Each type of barcode has its own unique properties. The barcode scanner can be adjusted to accommodate these property changes through the configuration code in this chapter. The fewer the barcode types, the faster the barcode scanner can read.

  • Page 35: All Symbologies

    SVOTON Technology All Symbologies If you want to decode all the symbologies allowable for your scanner, scan the All Symbologies On barcode. If on the other hand, you want to decode only a particular symbology, scan All Symbologies Off followed by the On barcode for that particular symbology.

  • Page 36: Codabar

    SVOTON Technology Codabar (900000.) Default All Codabar Settings On/Off (9000031.) * On (9000030.) Start/Stop Characters Start/Stop characters identify the leading and trailing ends of the barcode. You may either transmit, or not transmit Start/Stop characters.Default = Don’t Transmit. (9000061.) Transmit (9000060.)
  • Page 37 SVOTON Technology (9000010.) * No Check Character (9000011.) Validate but Don’t Transmit (9000012.) Validate and Transmit www.svoton.com...

  • Page 38: Concatenation

    SVOTON Technology Concatenation Codabar supports symbol concatenation. When you enable concatena- tion, the scanner looks for a Codabar symbol having a “D” start character, adjacent to a symbol having a “D” stop character. In this case the two mes- sages are concatenated into one with the “D” characters omitted.

  • Page 39: Message Length

    SVOTON Technology Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 2-60. Minimum Default = 4, Maximum Default = 60. (900005.) Minimum Message Length (900004.) Maximum Message Length www.svoton.com...

  • Page 40: Code 39

    SVOTON Technology Code 39 < Default All Code 39 Settings > (901000.) Default All Code 39 Settings Code 39 On/Off (9010011.) * On (9010010.) Start/ Stop Characters Start/Stop characters identify the leading and trailing ends of the barcode. You may either transmit, or not transmit Start/Stop characters. Default = Don’t Transmit.

  • Page 41: Check Character

    SVOTON Technology Check Character No Check Character indicates that the scanner reads and transmits bar- code data with or without a check character. When Check Character is set to Validate, but Don’t Transmit, the unit only reads Code 39 barcodes printed with a check character, but will not transmit the check character with the scanned data.

  • Page 42: Code 39 Append

    SVOTON Technology Code 39 Append This function allows the scanner to append the data from several Code 39 barcodes together before transmitting them to the host computer. When the scanner encounters a Code 39 barcode with the append trigger char- acter(s), it buffers Code 39 barcodes until it reads a Code 39 barcode that does not have the append trigger.

  • Page 43: Code 32 Pharmaceutical (Paraf)

    SVOTON Technology Code 32 Pharmaceutical (PARAF) Code 32 Pharmaceutical is a form of the Code 39 symbology used by Ital- ian pharmacies. This symbology is also known as PARAF. When you configure code32, you need to turn on code39 before you configure it.

  • Page 44: Full Ascii

    SVOTON Technology FULL ASCII If Full ASCII Code 39 decoding is enabled, certain character pairs within the bar- code symbol will be interpreted as a single character. For example:$V will be decoded as the ASCII character SYN, and /C will be decoded as the ASCII character #.

  • Page 45: Interleaved 2 Of 5

    SVOTON Technology Interleaved 2 of 5 < Default All Interleaved 2 of 5 Settings > (902000.) Default All Interleaved 2 of 5 Settings On/Off (9020021.) * On (9020020.) Check Digit No Check Digit indicates that the scanner reads and transmits barcode data with or without a check digit.
  • Page 46 SVOTON Technology (9020011.) Validate, but Don’t Transmit (9020012.) Validate and Transmit www.svoton.com...

  • Page 47: Message Length

    SVOTON Technology Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. (902004.) Minimum Message Length (902003.) Maximum Message Length www.svoton.com...

  • Page 48: Nec 2 Of 5

    SVOTON Technology NEC 2 of 5 < Default All NEC 2 of 5 Settings > (903000.) Default All NEC 2 of 5 Settings On/Off (9030011.) * On (9030010.) Check Digit No Check Digit indicates that the scanner reads and transmits barcode data with or without a check digit.
  • Page 49 SVOTON Technology (9030021.) Validate, but Don’t Transmit (9030022.) Validate and Transmit www.svoton.com...

  • Page 50: Message Length

    SVOTON Technology Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. (903004.) Minimum Message Length (903003.) Maximum Message Length www.svoton.com...

  • Page 51: Code 93

    SVOTON Technology Code 93 < Default All Code 93 Settings > (904000.) Default All Code 93 Settings On/Off (9040021.) * On (9040020.) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 0-80.

  • Page 52: Straight 2 Of 5 Industrial (Three-Bar Start/Stop)

    SVOTON Technology Straight 2 of 5 Industrial (three-bar start/stop) <Default All Straight 2 of 5 Industrial Settings> (905000.) Default All Straight 2 of 5 Industrial (three-bar start/stop)Settings On/Off (9050011.) (9050010.) * Off Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information.

  • Page 53: Straight 2 Of 5 Iata (Two-Bar Start/Stop)

    SVOTON Technology Straight 2 of 5 IATA (two-bar start/stop) <Default All Straight 2 of 5 IATA Settings> (906000.) Default All Straight 2 of 5 IATA (two-bar start/stop)Settings On/Off (9060011.) （9060010.） Message Length Scan the barcodes below to change the message length. Refer to...

  • Page 54: Matrix 2 Of 5

    SVOTON Technology Matrix 2 of 5 <Default All Matrix 2 of 5 Settings> (907000.) Default All Matrix 2 of 5 Settings On/Off (9070011.) (9070010.) * Off Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information.

  • Page 55: Code 11

    SVOTON Technology Code 11 <Default All Settings> (908000.) Default All Code 11 Settings On/Off (9080021.) (9080020.) * Off Check Digits Required This option sets whether 1 or 2 check digits are required with Code 11 barcodes. Default = Two Check Digits.

  • Page 56: Message Length

    SVOTON Technology Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-80. Minimum Default = 4, Maximum Default = 80. (908004.) Minimum Message Length (908003.) Maximum Message Length www.svoton.com...

  • Page 57: Code 128

    SVOTON Technology Code 128 <Default All Code 128 Settings> (909000.) Default All Code 128 Settings On/Off (9090011.) * On (9090010.) ISBT 128 Concatenation (9020051.) ISBT 128 On (9020050.) *ISBT 128 Off www.svoton.com...

  • Page 58: Message Length

    SVOTON Technology Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80. (909003.) Minimum Message Length (909002.) Maximum Message Length www.svoton.com...

  • Page 59: Gs1-128

    SVOTON Technology GS1-128 <Default All GS1-128 Settings> (910000.) Default All GS1-128 Settings On/Off (9100011.) * On (9100010.) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-80.

  • Page 60: Telepen

    SVOTON Technology Telepen <Default All Telepen Settings> (911000.) Default All Telepen Settings On/Off (9110011.) (9110010.) * Off Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-60.

  • Page 61: Upc-A

    SVOTON Technology UPC-A <Default All UPC-A Settings> (912000.) Default All UPC-A Settings (9120031.) * On (9120030.) Note: When UPC-A Off is scanned, UPC-A barcodes are transmitted as EAN- 13. Check Digit This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not.

  • Page 62: Number System

    SVOTON Technology Number System The numeric system digit of a U.P.C. symbol is normally transmitted at the beginning of the scanned data, but the unit can be programmed so it will not transmit it. Default = On. (9120051.) * On (9120050.)

  • Page 63: Addenda Required

    SVOTON Technology Addenda Required When Required is scanned, the scanner will only read UPC-A barcodes that have addenda. You must then turn on a 2 or 5 digit addenda. Default = Not Required. (9120061.) Required (9120060.) * Not Required Addenda Separator When this feature is on, there is a space between the data from the barcode and the data from the addenda.

  • Page 64: Upc-E0

    SVOTON Technology UPC-E0 <Default All UPC-E Settings> (914000.) Default All UPC-E0 Settings On/Off Most U.P.C. barcodes lead with the 0 number system. To read these codes, use the *UPC-E0 On selection. If you need to read codes that lead with the 1 number system, use UPC-E1.

  • Page 65: Expand

    SVOTON Technology Expand UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format. Default = Off. (9140021.) (9140020.) * Off Addenda Required When Required is scanned, the scanner will only read UPC-E barcodes that have addenda. Default = Not Required.

  • Page 66: Check Digit

    SVOTON Technology (9140040.) Check Digit Check Digit specifies whether the check digit should be transmitted at the end of the scanned data or not. Default = On. (9140051.) (9140050.) www.svoton.com...

  • Page 67: Number System

    SVOTON Technology Number System The numeric system digit of a U.P.C. symbol is normally transmitted at the beginning of the scanned data, but the unit can be programmed so it will not transmit it. To prevent transmission, scan Off. Default = On.

  • Page 68: Upc-E1

    SVOTON Technology UPC-E1 Most U.P.C. barcodes lead with the 0 number system. For these codes, use UPC-E0. If you need to read codes that lead with the 1 number system, use the UPC-E1 On selection. Default = Off. (9140091.) UPC-E1 On (9140090.)

  • Page 69: Check Digit

    SVOTON Technology Check Digit This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. (9150021.) * On (9150020.) Addenda This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data.

  • Page 70: Addenda Required

    SVOTON Technology Addenda Required When Required is scanned, the scanner will only read EAN/JAN-13 barcodes that have addenda. Default = Not Required. (9150051.) Required (9150050.) * Not Required Addenda Separator When this feature is On, there is a space between the data from the barcode and the data from the addenda.

  • Page 71: Ean/Jan-8

    SVOTON Technology EAN/JAN-8 <Default All EAN/JAN-8 Settings> (916000.) Default All EAN/JAN-8 Settings On/Off (9160011.) * On (9160010.) Check Digit This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On.

  • Page 72: Addenda Required

    SVOTON Technology (9160031.) 2 Digit Addenda On (9160030.) * 2 Digit Addenda Off (9160041.) 5 Digit Addenda On (9160040.) * 5 Digit Addenda Off Addenda Required When Required is scanned, the scanner will only read EAN/JAN-8 barcodes that have addenda. Default = Not Required.
  • Page 73 SVOTON Technology When this feature is On, there is a space between the data from the barcode and the data from the addenda. When turned Off, there is no space. Default = On. (9160061.) * On (9160060.) www.svoton.com...

  • Page 74: Msi

    SVOTON Technology <Default All MSI Settings> (917000.) Default All MSI Settings On/Off (9170011.) (9170010.) * Off www.svoton.com...

  • Page 75: Check Characte

    SVOTON Technology Check Characte MSI barcodes use different types of check characters. You can configure the barcode scanner to read the MSI barcode using the check character. Default = Validate MOD 10, but Don’t Transmit When Check Character is set to Validate MOD 10 and Transmit, the...

  • Page 76: Gs1 Databar Omnidirectional

    SVOTON Technology GS1 DataBar Omnidirectional < Default All GS1 DataBar Omnidirectional Settings > (918000.) Default All GS1 DataBar Omnidirectional Settings On/Off (9180011.) * On (9180010.) GS1 DataBar Limited < Default All GS1 DataBar Limited Settings > (919000.) Default All GS1 DataBar Limited Settings On/Off (9190011.)

  • Page 77: Gs1 Databar Expanded

    SVOTON Technology GS1 DataBar Expanded < Default All GS1 DataBar Expanded Settings > (920000.) Default All GS1 DataBar Expanded Settings On/Off (9200011.) * On (9200010.) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information.

  • Page 78: Pdf417

    SVOTON Technology PDF417 < Default All PDF417 Settings > (924000.) Default All PD417 Settings On/Off (9240011.) * On (9240010) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-2750.

  • Page 79: Qr Code

    SVOTON Technology QR Code < Default All QR Code Settings > (928000.) Default All QR Code Settings On/Off This selection applies to both QR Code and Micro QR Code. (9280011.) * On (9280010.) Message Length Scan the barcodes below to change the message length. Refer to...

  • Page 80: Data Matrix

    SVOTON Technology Data Matrix < Default All Data Matrix Settings > (930000.) Default All Data Matrix Settings On/Off (9300011.) * On (9300010.) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-3116.

  • Page 81: Aztec Code

    SVOTON Technology Aztec Code < Default All Aztec Code Settings > (931000.) Default All Aztec Code Settings On/Off (9310011.) * On (9310010.) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-3832.

  • Page 82: China Post (Hong Kong 2 Of 5)

    SVOTON Technology China Post (Hong Kong 2 of 5) <Default All China Post (Hong Kong 2 of 5) Settings> (936000.) Default All China Post (Hong Kong 2 of 5)Settings On/Off (9360011.) (9360010.) * Off Message Length Scan the barcodes below to change the message length. Refer to...

  • Page 83: Korea Post

    SVOTON Technology Korea Post <Default All Korea Post Settings> (937000.) Default All Korea Post Settings On/Off (9370011.) (9370010.) * Off Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 2-80.

  • Page 84: Check Digit

    SVOTON Technology Check Digit This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data. Default = Don’t Transmit. (9370041.) (9370040.) * Off Han Xin Code <Default All Han Xin Code Settings>...
  • Page 85 SVOTON Technology (932003.) Minimum Message Length (932002.) Maximum Message Length www.svoton.com...

  • Page 86: Maxi Code

    SVOTON Technology Maxi code <defalt all maxi code settings> (929000.) On/Off (9290011.) (9290010.) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-150. Minimum Default = 1, Maximum Default = 150.

  • Page 87: Micropdf

    SVOTON Technology Micropdf <defalt all micropdf settings> (925000.) On/Off (9250011.) (9250010.) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-366. Minimum Default = 1, Maximum Default = 366.

  • Page 88: On/Off

    SVOTON Technology <defalt all composites settings> (926000.) On/Off (9260011.) (9260010.) Message Length Scan the barcodes below to change the message length. Refer to Message Length Description for additional information. Minimum and Maximum lengths = 1-2435. Minimum Default = 1, Maximum Default = 2435.

  • Page 89: Chapter 6 Utilities

    SVOTON Technology Chapter 6 Utilities Show Software Revision Scan the barcode below to output the current software revision, unit serial number, and other product information. (809005.) Show Revision www.svoton.com...

  • Page 90: Chapter 7 Common Problems And Solutions

    SVOTON Technology Chapter 7 Common Problems And Solutions Problem: The barcode scanner does not work. possible reason： 1. The barcode scanner is not powered, check the power of the equipment. If you are using an incorrect cable, use the cable that was originally configured.

  • Page 91: Chapter 8 Maintenance And Customer Service

    SVOTON Technology Chapter 8 Maintenance And Customer Service Maintenance Stains and dust on the scanning window can sometimes affect the normal operation of the barcode scanner. When cleaning, use a good quality tissue to wipe gently, or use a soft cloth to clean.

  • Page 92: Reference Charts

    SVOTON Technology Reference Charts Symbology Charts Linear Symbologies Possible Symbology Modifiers （m） All Symbologies Codabar Code 11 Code 128 0, 1, 2, 4 Code 32 Pharmaceutical < (PARAF) Code 39 (supports 0, 1, 3, 4, Full ASCII mode) TCIF Linked Code 39...
  • Page 93 SVOTON Technology Possible Symbology Modifiers （m） GS1 DataBar GS1 DataBar Limited GS1 DataBar Expanded GS1-128 2 of 5 China Post (Hong Kong 2 of Interleaved 2 of 5 0, 1, 3 Matrix 2 of 5 NEC 2 of 5 Straight 2 of 5 IATA...

  • Page 94: 2D Symbologies

    SVOTON Technology 2D Symbologies Possible Symbology Modifiers （m） All Symbologies 0-9, A-C Aztec Code Chinese Sensible Code (Han Xin Code) Codablock A 0, 1, 4, 5, Codablock F 0, 1, 4, 5, 0, 1, 2, 4 Code 49 Data Matrix...

  • Page 95: Postal Symbologies

    SVOTON Technology Postal Symbologies Possible Symbology Modifiers （m） All Symbologies Australian Post British Post Canadian Post Symbology Possible Modifier （m） China Post InfoMail Intelligent Mail Bar Code Japanese Post KIX (Netherlands) Post Korea Post Planet Code Postal-4i Postnet www.svoton.com...

  • Page 96: Ascii Conversion Chart

    SVOTON Technology ASCII Conversion Chart Char NUL （Null char.） SOH （Start of Header） STX （Start of Text） ETX （End of Text） EOT （End of Transmission) ENQ （Enquiry） ACK （Acknowledgment） BEL （Bell） BS （Backspace） HT （Horizontal Tab） LF （Line Feed） VT （Vertical Tab）...
  • Page 97 SVOTON Technology % （Percent） & （Ampersand） ` （Single Quote） (（Right / Closing Parenthesis） )（Right / Closing Parenthesis） * （Asterisk） + （Plus） ,（Comma） -（Minus / Dash） . （Dot） / （Forward Slash） ：（Colon） ；（Semi-colon） （Less Than） < （Equal Sign） （Greater Than） >...
  • Page 98 SVOTON Technology [ （Left / Opening Bracket） \（Back Slash） ] （Right / Closing Bracket） ^ （Caret / Circumflex） _ （Underscore） ' （Grave Accent） { （Left/ Opening Brace） www.svoton.com...

  • Page 99: Sample Symbols

    SVOTON Technology | （Vertical Bar） } （Right/Closing Brace） ~ （Tilde） DEL （Delete） Sample Symbols UPC-A www.svoton.com...
  • Page 100 SVOTON Technology Interleaved 2 of 5 01234567890 Code 128 Straight 2 of 5Industrial 123456 Matrix 2 of 5 6543210 www.svoton.com...
  • Page 101 SVOTON Technology Code 93 Straight 2 of 5Industrial 123456-9$ 123456 Matrix 2 of 5 GS1DataBar 6543210 PDF417 Codabar www.svoton.com...
  • Page 102 SVOTON Technology Data Matrix TestSymbol QRCode Numbers Aztec Micro PDF417 MaxiCode Test Message Test Message www.svoton.com...
  • Page 103 SVOTON Technology Programming Charts (K0K.) (K1K.) (K2K.) (K3K.) (K4K.) (K5K.) (K6K.) (K7K.) www.svoton.com...
  • Page 104 SVOTON Technology (K8K.) (K9K.) (KAK.) (KBK.) (KCK.) (KDK.) (KEK.) (KFK.) www.svoton.com...
  • Page 105 SVOTON Technology (800002.) Save (800000.) Discard Note: If an error occurs while scanning a letter or number (before scanning the "Save" barcode), scan the "Discard" barcode, rescan the correct letter or number, and then scan the "Save" barcode. www.svoton.com...
  • Page 106 SVOTON Technology ASCII conversion of keyboard operation CTRL+X FUNCTION CTRL+@ CTRL+A Select all CTRL+B Bold CTRL+C Copy CTRL+D Bookmark CTRL+E Center CTRL+F Find CTRL+G CTRL+H History CTRL+I CTRL+J Justify CTRL+K Hyperlink CTRL+L CTRL+M CTRL+N CTRL+O Open CTRL+P Print CTRL+Q Quit...

Table of Contents