NETWORk SETTINGS
–
Automatic: sets the MTU (Maximum Transmission
Automatic
Unit) at 1500.
–
Automatic by DHCP
Automatic by DHCP: sets the MTU according to the
DHCP connection.
–
Manual: allows you to manually set the MTU.
Manual
•
IP address
IP address and Subnet Mask
uses a permanent or static IP address
address, provided by Verizon or experienced network
technician.
•
Bridge
Bridge
In the Bridge
properties, you can configure the various LAN interfaces.
Caution:
instructed to by Verizon. Changes could adversely affect
the operation of your Gateway and your local network.
Verify the following information:
–
IP Passthrough – select to disable Wi-Fi and routing
IP Passthrough
capabilities of the Gateway. May be necessary if
connecting 3rd party routers to the Gateway using
the LAN 2 port of your Gateway for Internet traffic,
and LAN 1 will be only used for Web GUI access and
disabling the IPPT mode into the device.
–
Status – displays the connection status of a specific
Status
network connection.
Subnet Mask: the network connection
Bridge section of the Network (Home/Office)
Do not change these settings unless specifically
IP address and Subnet Mask
Network (Home/Office)
Subnet Mask