Advertisement
Step 6)
Install Front Tray Braces - Position the lower angle end of #WB1007
Tray Braces onto the 3/4" bolts already secured to tray. Finger
tighten with Serrated Flange Nuts.
Step 7)
Install Nose Brace - Position the #WB1001 in place on outside of
handles, tow ring toward the tray. Slide the (4) 2-3/8" Slot Head
Bolts through the handles, from the inside, and secure Nose Brace
on outside with washers and nylon lock nuts.
Tow
Ring
Toward
Tray
Step 8)
Tighten Nose Brace Hardware - Completely tighten the Nose Brace
bolts/nuts at this time.
Step 9)
Install One Axle Bracket - Place a #WB1006 Axle Bracket into posi-
tion, bracket dimple to the outside. Insert a 2-1/2" Slot Head Bolt
through the handle and rear hole. Fasten washer and nylon lock nut.
Postion #WB1007 Front Tray Brace over front hole, install a 2-3/4"
Slot Head Bolt through the brace, handle, and axle bracket, then
secure with washer and nylon lock nut.
Front bolt secures both tray brace and axle bracket.
Step 10)
Install Wheel and Axle - Slip the#WB1008 axle through the Wheel.
Postion wheel between handles and slide axle into the installed axle
bracket.
Step 11)
Install Second Axle Bracket - Place the second #WB1006 Axle
Bracket over the axle end, align with handle holes, and secure with a
2-1/2" slot head bolt and 2-3/4" slot head bolt (front hole).
Advertisement
