Table of Contents
Advertisement
Digital Piano Operation
To select a single tone
1.
While holding down 3 FUNCTION, press one
of the Tone keyboard keys (C3 through A3).
• To select HARPSICHORD, for example, hold down
3 FUNCTION and press the HARPSICHORD
keyboard key (F{3). A short beep will sound to confirm
the setting.
C1
C2
C3
2.
Release 3 FUNCTION.
EN-8
C4
C5
C6
C7
HARPSICHORD key (F{3)
To layer two tones
1.
While holding down 3 FUNCTION, press the
Tone keyboard keys (C3 through A3) of the first
tone and then the second tone you want to
layer.
• To layer HARPSICHORD and STRINGS, for example,
hold down 3 FUNCTION and press the
HARPSICHORD keyboard key (F{3), and then the
STRINGS key (G3).
• Pressing the first keyboard key for the first tone will
cause a short beep to sound, and press the key for the
C8
second tone will cause a short and then long beep to
sound, indicating that the tones whose keys you
pressed have been layered.
C1
C2
2.
Release 3 FUNCTION.
• Now pressing a single keyboard key will sound both
the HARPSICHORD and STRINGS tones at the same
time.
• To cancel tone layering, perform the procedure under
select a single
4 GRAND PIANO, which changes the keyboard tone to
GRAND PIANO STANDARD only.
C3
C4
C5
C6
HARPSICHORD key (F{3)
STRINGS key (G3)
tone" (page EN-8). Or you could press
C7
C8
"To
Advertisement
Table of Contents
