Table of Contents
Advertisement
S
UPER P4STA User's Manual
4-7
Boot-up Devices
When the Item "Boot" is highlighted on the main menu bar, hit the
<Enter> key to activate the following screen:
Award BIOS attempts to load the operating system from devices
specified by the users in a user-specified sequence.
[First Boot Device]
This item allows the user to set the device as the first boot-up device. The
settings are "Floppy", "LS120", ""HDD", "SCSI", "CDROM","ZIP100", "LAN", and
"Disabled". The default setting is "Floppy".
[Second Boot Device]
This item allows the user to set the device as the second boot-up device.
The settings are "Floppy", "LS120", ""HDD", "SCSI", "CDROM","ZIP100", "LAN",
and "Disabled". The default setting is "CDROM".
[Third Boot Device]
This item allows the user to set the device as the third boot-up device. The
settings are "Floppy", "LS120", ""HDD", "SCSI", "CDROM","ZIP100", "LAN", and
"Disabled". The default setting is "HDD".
[Boot Other Device]
If enabled, this option enables the BIOS to load the OS from another device
rather than the ones that have been specified as the first, second, and third
boot up devices. The settings are "Enabled", and "Disabled". The default
setting is "Enabled".
4-22
Advertisement
Table of Contents
Need help?
Do you have a question about the SUPER P4STA and is the answer not in the manual?