Supero SUPER P4STA User Manual page 56

S
UPER P4STA User's Manual
[Typematic Rate Setting]
Key strokes repeat at a rate pre-determined by the keyboard
controller. The key stroke repeating rate is called the Typematic rate.
If "enabled", this option allows the user to set the Typematic Rate of
the system. If "Disabled", the user will not be allowed to set the
Typematic rate and the following two items-Typematic Rate and
Typematic Delay will not be displayed. The settings are "Enabled"
and "Disabled". The default setting is "Disabled".
[Typematic Rate (Chars/Sec)]
If enabled, the option allows the user to set the number of times a key
stroke repeats itself in a second when the key is held down. The settings
are: "6", "8", "10", "12", "15", "20", "24", and "30". The default setting is
"6".
[Typematic Delay]
The option sets the delay time after a key is held down before it
begins to repeat the keystroke. The settings are: "250", "500", "750",
"1000". The default setting is "250".
[OS Select For DRAM> 64MB]
The option allows the user to select the operating system that requires a
DRAM memory greater than 64MB in order to function properly. The
settings are "OS2", and "Non OS2". The default setting is "Non OS2".
[Power On after Power Fail]
This option allows the user to determine if the system's power will be
automatically turned on or remains "off" after a power failure. The settings
are "On", "Off" and "Former Status". The default setting is "Off".
4-8