Table of Contents
Advertisement
S
UPER P4STA User's Manual
[IDE HDD Auto-Detection]
Press the <Enter> key to activate the function of "IDE HDD
Auto-Detection" to automatically detect the status of the IDE
HDD installed in the system, such as the sizes of the Hard
drives.
[IDE Primary Master PIO]
The IDE PIO (Programmed Input/Output) field allows you to set a PIO
mode (0-4) for the IDE Primary device: Mode 0 through Mode 4, with
each increase in number indicates increase in performance,
correspondently. The settings are "Auto", "Mode 0", "Mode 1", "Mode
2", "Mode 3", and "Mode 4". The default setting is "Auto".
[Access Mode]
The settings are "CHS", "LBA", "Large", "Auto". The default setting is
"Auto".
[IDE Primary Master UDMA]
This option is available only when your IDE hard drive supports Ultra
DMA/33 and the operating environment also includes a DMA drive
(Windows 95 OSR2 or a third-party IDE bus master driver).
If your
IDE hard drive and your system software both support Ultra DMA/33,
select "Auto" to enable BIOS support. The settings are "Auto", and
"Disabled". The default setting is "Auto".
4-4
Advertisement
Table of Contents
Need help?
Do you have a question about the SUPER P4STA and is the answer not in the manual?