, Note for Status LED's Condition
y When you set the group at first, F (Function) LED turns green.
y The additional groups are set, the F (Function) LED color is
changed in group order.
[Green > Magenta > Cyan > Blue > Yellow]
y If the grouped speakers switch to the network standby mode,
the brightness of F (Function) LED gets dark.
About Ferrite Core (Optional)
This ferrite core can reduce or eliminate electrical interference.
How to attach the ferrite core
P8350B-M0.BUSALLK_SIM_MFL69154860.indd 29
1. Pull the stopper [a] of the
ferrite core to open.
2. Wind the power cord twice
on the ferrite core.
3. Close the ferrite core until
it clicks.
Appendix
29
5
2015-07-24
8:59:45