Nokia 8390 User Manual page 99

Note: If you make a mistake while entering the code, Code Error
appears. Start again at step 2 and be careful to enter the correct
code. If you enter the wrong code three times in a row, the PIN
code is blocked. To unblock the PIN code, see "PUK codes" on page
91.
SET PIN CODE REQUEST
This feature sets your phone to ask for the PIN code each time the phone
is switched on and prevents unauthorized use of your phone.
1 Press Menu 4 9 1.
2 Enter the PIN code supplied by your service provider, and press OK.
3 Press (up or down) to highlight On and press OK.
To turn off this feature, repeat steps 1 through 3 above, but highlight Off
in step 3.
Note: If you enter the wrong PIN or PIN2 code three times in a row, the
SIM card is automatically blocked or you cannot activate the
function. See "PUK codes" below to unblock the codes.
PUK codes
The PUK (Personal Unblocking Key) and PUK2 codes are 4- to 8-digit codes
that also usually come from your service provider along with the SIM card.
The PUK code unblocks a blocked PIN code, and the PUK2 code unblocks
a blocked PIN2 code.
UNBLOCK A PIN CODE
[verify later with a proto and correct codes]
1 Press Menu 4 9 5, then press Select.
Change PIN code appears.
2 To unblock the PIN2 code, press (down) to select Change PIN2 code.
3 Press Select.
PIN code blocked appears.
4 Enter the PUK code, then press OK.
Nokia 8390 draft v1.1[ 91 ]
13