Advertisement
2 Install tripod fittings and tighten
the four hex screws.
LunarStar 28K - User manual
Product weight
8.6kg
Product size
265x820mm
NS Part No.
NSLUNARSTAR28K
Installation, when using optional tripod:
3 Open the tripod bracket and align the
hole with tripod fitting, then attach the
safety bolt and tighten it.
Optional 2.6m tripod:
NSCode: SPTRIOPOD2.6
1 Remove the four hex screws from
the bottom of the lamp body.
4 Its recommended to use the
supplied guide lines to secure the
tripod on ruff terrain or harsh
weather conditions.
Secure the guides here
Advertisement
Table of Contents
Summary of Contents for NightSearcher LunarStar 28K
- Page 1 LunarStar 28K - User manual Optional 2.6m tripod: Product weight 8.6kg Product size 265x820mm NSCode: SPTRIOPOD2.6 NS Part No. NSLUNARSTAR28K Installation, when using optional tripod: 1 Remove the four hex screws from the bottom of the lamp body. Secure the guides here...
- Page 2 - Always make sure the light system is disconnected from any power sources and turned off when performing any routine cleaning or maintenance. - Keep out of reach of children. - Do not try to repair the light or cable yourself. In case of any problems or questions please contact NightSearcher Limited or an authorised distributor. NightSearcher Limited...
Need help?
Do you have a question about the LunarStar 28K and is the answer not in the manual?
Questions and answers