Page 2
PARTS [dimensions in mm / different scales] No extra or spare parts listed! Mounting plate for joystick or throttle as ordered. usually pre-assembled on the 70 mm profile above MTSIM MTS HOTAS INSTRUCTION MANUAL...
BAG 1 BAG 2 black silver SWIVEL ADAPTER 26,1 MTSIM MTS HOTAS INSTRUCTION MANUAL...
Page 4
MTS HOTAS Swivel Extra Plate Kit right side left side One bracket for left OR right side as ordered. MTSIM MTS HOTAS INSTRUCTION MANUAL...
Page 5
ASSEMBLY threads at this end slot nut loosely pre-assembled universal connector M8x30 cap with open slots (usually pre-assembled) MTSIM MTS HOTAS INSTRUCTION MANUAL...
Page 6
(height positioning) then tighten the screws Extension for better tightening power. hex key MTSIM MTS HOTAS INSTRUCTION MANUAL...
Page 7
- ting plate you ordered (e.g. M6 or M8) e.g. M8x16 flat head (depends on the mounting plate you ordered) black or silver Mounting plate for joystick or throttle as ordered. MTSIM MTS HOTAS INSTRUCTION MANUAL...
Page 8
Screw on loosely at first! washer Ø16 M8x14 Attention! There is a left and right side version of this bracket! The opening should face towards the seat. MTSIM MTS HOTAS INSTRUCTION MANUAL...
Page 12
3x M8x18 left side of the rig 3x washer Ø24 choose desired distance assembly for the left side of the rig assembly for the right side of the rig MTSIM MTS HOTAS INSTRUCTION MANUAL...
Page 14
4x slot nut M8 on the side of the rig where you want to assemble very loose 4x universal connector 4x M8x30 MTSIM MTS HOTAS INSTRUCTION MANUAL...
Page 17
Slide down until it touches the profile. Then tighten the green marked screws. faded Tighten set screw and knob. MTSIM MTS HOTAS INSTRUCTION MANUAL...
OPERATION Loosen knob 1 and lever 2 to swivel. Tighten lever 2 in any desired position. Tighten knob 1 in working position for more stability. 21-09-2023...
Need help?
Do you have a question about the MTS HOTAS and is the answer not in the manual?
Questions and answers