uuGauges and Driver Information InterfaceuDriver Information Interface (Right Side Area)
■
Warnings
You can check if there are any active warning messages.
■
Speed/Distance Units
154
Enables you to show another unit on the
driver information interface and set the
displayed measurements to read in either
miles and km, mph and km/h.
Press and hold the right selector wheel when
you select the Blank/Unit change screen on
the driver information interface. Each time you
do this, the unit will change from miles and
mph to km and km/h or vice versa. After this,
a confirmation screen will appear for a few
seconds.
1Warnings
If there are multiple warnings, you can roll the right
selector wheel to see other warnings.