Acura RDX 2020 Manual page 446

Hide thumbs Also See for RDX 2020:
Table of Contents

Advertisement

When the system detects a vehicle
Comes On
Blinks
Blind spot information
System Alert Indicator
* Not available on all models
Blind spot information System Alert Indicator:
Located near the pillar on both sides.
Comes on when:
• A vehicle enters the alert zone from behind
to overtake you with a speed difference of
no more than 31 mph (50 km/h) from your
vehicle.
• You pass a vehicle with a speed difference
of no more than 12 mph (20 km/h).
Blinks and a beeper sounds when:
You move the turn signal lever in the direction
of the detected vehicle. The beeper sounds
three times.
uuWhen DrivinguBlind spot information System
1Blind spot information System
The system is for your convenience only. Even if an
object is within the alert zone, the following
situations may occur.
The blind spot information system alert indicator
may not come on due to obstruction (splashes,
etc.) even without the Blind Spot Information
System Not Available multi-information display
appearing.
The blind spot information system alert indicator
may come on even with the message appearing.
The system does not operate when in
You can turn off the audible alert, or all the blind spot
information system alert using the audio/information
screen.
2 Customized Features P. 335
Turn the system off when towing a trailer.
The system may not work properly for the following
reasons:
The added mass tilts the vehicle and changes the
radar coverage.
The trailer itself can be detected by the radar
sensors, causing the blind spot information system
alert indicators to come on.
Continued
*
*
.
(
R
445

Advertisement

Table of Contents
loading

Table of Contents