Do you have a question about the SWCW26 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for SERV-WARE SWCW26
Page 1
800•768•5953 Chip Warmers Service, Installation and Care Manual Please read this manual completely before attempting to install or operate this equipment. Notify carrier of damage! Inspect all components immediately. SWCW26 SWCW46 IMPORTANT INFORMATION ABOUT YOUR UNIT ENCLOSED. PLEASE READ BEFORE USE! Save These Instructions! Parts &...
Page 2
Service, Installation & Care Manual COMMECIAL CHIP WARMER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol.
Page 3
Service, Installation & Care Manual COMMECIAL CHIP WARMER SAFETY The key for appliance electric box should be safe kept by qualified persons in order to avoid a hazard. WARNING: Risk of fire / flammable materials. All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
Service, Installation & Care Manual ELECTRIC DIAGRAM INSTALLATION AND PLACEMENT 1. Chip warmers are assembled and inspected before leaving the factory. 2. After unpacking the warmer you will only need to install the legs. 3. To install legs, carefully tip Chip Warmer onto its side. Screw legs into pre-drilledholes and return warmer to the upright position 4.
Page 9
Service, Installation & Care Manual ELECTRICAL REQUIREMENTS Electrical connections: NOTE! Warmers are equipped with a three-prong plug. The plug must be connected into a properly grounded three-prong outlet. Do not remove the grounding prong from this plug. The warmer is factory wired for 120 volt single phase operation. All warmers are equipped with an 8’...
Service, Installation & Care Manual OPERATING INSTRUCTIONS 1. Verify that the chip warmer is connected to the correct power source. 2. The lighted power switch is located on right back side of the chip warmer. Switchpower switch to ON position. Verify that the switch illuminates. 3.
Service, Installation & Care Manual CLEANING INSTRUCTIONS Heavy-Duty Cleaning: For heavy-duty cleaning, use warm water, a degreaser, and a soft cloth. Never rub in a circular motion; rub gently in the direction of the stainless steel grain and rinse thoroughly. TROUBLESHOOTING Heavy-Duty Cleaning: PROBLEM...
(“the products”) shall be free of defects in material or workmanship under normal and proper use and maintenance service as specified by Serv-Ware Products and upon proper installation and start-up as well as for a period of one (1) year from the original installation date or a maximum of eighteen (18) months after the shipment date from Serv-Ware Products.
Page 13
Service, Installation & Care Manual NOTES 800•768•5953 www.servware.com...
Page 14
Products LLC. 222 Hwy 58 South Kinston, NC 28504 Parts & Service Manuals Available at: www.servware.com 800•768•5953...
Need help?
Do you have a question about the SWCW26 and is the answer not in the manual?
Questions and answers